I've got limited experience cutting Al, so far. But as soon as one goes from HSS cutters to carbide, the SFM you can get is so high that, I agree, there's no need for those low RPMs.
Type: Posts; User: jo_ky
I've got limited experience cutting Al, so far. But as soon as one goes from HSS cutters to carbide, the SFM you can get is so high that, I agree, there's no need for those low RPMs.
What sources are you looking at? Personally, I got an OMIO X6, the 2.2kw, and although I had a few hiccups getting it going, plus had to correct a part that was not quite the right dimension, since...
To be clear, the test has to be done with everything else disconnected. That's the case?
I would also check if there's any change in the voltage levels depending on whether it's one or both closed.
Have you read this? https://www.cnczone.com/forums/general-cnc-machine-related-electronics/110986-software.html
Replacing with TB6600 drivers only costs about $60, and you can get something that's...
Lowering voltages is not what resistors do. They set the voltage to current relationship. Spend some time with ohm's law and the voltage divider equation, and it may start to make sense.
You can...
Ah yes, with no load resistor it is open collector output. That should have been obvious, doh!
Yes, in that case it can be done right with no extra transistor. You activate pull-up on the C10, and...
You shouldn't need any negative voltages. Connect blue to ground and connect brown to your positive voltage supply.
Connect a load resistor between brown and black. The value should be high enough...
I use a passively cooled PC in the shop. I made my own, using the H1.S case by HD-PLEX. It was a fun little project! That case is small, but still has a single PCI-e slot, so that I'm not limited in...
Somebody else chime in here... I have no idea, as far as particular issue of estop that won't clear w/ Mach 4...
You could post screenshots of the configs you've entered. Someone might spot...
Well, I'm sure there are a lot of weird drivers with weird compatibility issues, out there. I didn't mean to say that you don't know your stuff. But as far as Mach 3 and PCI-e parallel cards goes, I...
Yeah, I believe you're thinking of USB based parallel adapters.
Buy one of these and use any PCI-e slot:
https://www.ebay.com/itm/222897270029
Sounds like the kind of thing that might be solved by reinstalling the software / driver.
That MillRight only has NEMA 17 steppers, I notice. With $1000 I think a 6040 would be worth it so you can have an 80mm spindle, meaning ER16 or even ER20 collet, and the same 24k rpm. If it's a...
You'll need to clarify on "Smooth Stepper LPT," I think. A terminal board for the SmoothStepper would be a breakout board (BOB). The SmoothStepper is your motion controller board.
The connection...
If I get a 4th axis assembly, what reduction ratio do you all think is most useful? The one I'm looking at would be an 80mm 4-jaw chuck, and I can choose between 50:1 and 100:1 for the gear ratio...
An interesting project, regardless. Wanted to also tell you that if you have that micro with linux in your design, then you can use something like pysolar to get the correct alt and az angles for...
It's not a bad price for hardened steel with the tolerance rated (V-groove is not just a low cost approach - for some applications it's much preferred to round rod or profile). But yeah. It looks...
I searched for it as V-groove track, found some stuff. What about something like this? https://www.ebay.com/itm/131898162874
Hey, welcome all! And oh yeah, I never introduced myself.:wave: I've never posted in a welcome thread before, LOL.
My name's John Kyle, and I like CNC. And I really like this guy:banana: So far I've...
I'm learning as I go here, particularly from that website you just linked - it's great! So, correct me if I'm wrong on a technicality. The Oldham coupling is the type with full diameter slots that...
Here are two more:
https://vacuumtablesusa.com/t-slot-plates
https://www.worldofclamping.com/index.php?page=categorie&cat=127
If your interest is in solving global warming, there are thousands of people in universities, think tanks, etc. working on it. I think a single invention can only play a small role in that.
...
For that, you need a 24 V variable DC power supply, not a VFD. At 125 amps max output, it'll be pricey!
Also, I think that type of motor has a limited RPM range.
The steps per unit setting is in the lower left corner of the 'motor tuning' configuration dialog. What happens when you change that?
Steps per unit can be calculated from the screw pitch and...
For my Kool Mist, I was planning to zip tie the coolant and supply lines to the outside of the cable carrier on the gantry (since it's full), and then run them loose from there to the compressor...
That's useful, thanks! What was the feed rate and angle for the helix? Any coating on the carbide bit you use?
I'd also be interested in fixing the issue with the Goto Zero button. When I first experienced that problem was when I decided that Mach 3 is not going to work for me, long term. I used to be a...
To make it out of acrylic, I'm not really sure, because I haven't milled that material yet. It's not that complex a shape, true. That brush strip is set in and adhered nicely in the acrylic ring,...
I just bought a Kent Mini. My spindle is also a 2.2kW. It has a 59.5mm diameter lip below the main body of the spindle but above the collet holder. That's where the dust shoe is attached, so I bought...