508,601 active members
2,763 visitors online
Register for free
Login

Search:

Type: Posts; User: ger21

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    9
    Views
    26

    There are multiple sections in the screen file,...

    There are multiple sections in the screen file, for each controller. You hzve to edit it in the correct section.
  2. Replies
    9
    Views
    26

    Re: UCCNC default Jog Speed

    In the screen file, there are eparate screens for each differernt controller. You need to edit the correct portion for the controller that you are using.
  3. Thread: G31 not working

    by ger21
    Replies
    7
    Views
    25

    Re: G31 not working

    Almost all Chinese controllers have problems with probing.
  4. Replies
    11
    Views
    28

    Re: Mach3 Partial Lockup

    Try turning off the toolpath display and see if it helps.
  5. Re: Shopbot PRT Alpha, upgrade to Acorn / Gecko g251x, power supply question.

    Powering the steppers with less than 48V will result in poor performance.
  6. Re: Rookie question on minimum spindle speed of a HSD spindle

    You could call HSD and ask them.

    The data sheet shows a torque curve starting at 200Hz, or 12,000 rpm. I'd stay above that.
  7. Replies
    12
    Views
    158

    Re: Fusion Terms of Service

    It's still free for hobbyists.
  8. Replies
    7
    Views
    39

    Re: enroute and aspire

    Cabinet Solutions website has basically zero info on their cnc export.

    You need to learn and understand how the process works, before you spend your money.

    Most likely, Cabinet Solutions is...
  9. Re: Way cheap downloads for Aspire on Ebay - are they for real?

    They are pirated, illegal copies.
  10. Re: Beginner design advice for small 24" x 24" machine

    If anything, I would say you could go bigger. Everyone wishes their machines were more rigid, and more powerful.



    Almost everyone uses C7 screws, unless you want to pay 5x more. But unless you...
  11. Re: Wanting to build 4x2 4 axis machine. Where to start

    If you can do the fabrication yourself, you can build a rotary axis similar to the Avid 4th axis for less than half the price. It's not much more than a motor and gearbox, with a chuck mounted on the...
  12. Replies
    4
    Views
    26

    Re: Axis movement problem.

    Try lubricating all the screws and bearings.
  13. Replies
    24
    Views
    129

    Re: Mach4+ESS or Acorn?

    My understanding is that the Acorn does not work the same as the ESS or CNC Drive controllers.
    I beleive the Acorn does the trajectory planning in hardware, rather than in software like all the...
  14. Sticky: Re: Router Bits and EndMills: Pictures, Descriptions, and Uses

    Looks like it's just pocketed. In that case, use the largest straight bit that will give you the detail you need in the letters. This may require a very small bit, which can take a lot of time. You...
  15. Re: DCS-100-A Step/Dir to 10v analog by Prisma in Serbia

    Larken's Step2Linear does the same thing.
    Viper Servo motor products
  16. Re: AVID CNC PRO 48x48 Purchase (Mach 4 Concerns)

    There's a 5 year old 4x8 Stinger with ATC for sale on the Camaster forum for $19,000.
  17. Replies
    5
    Views
    72

    Re: UB1 Wiring Questions

    I'm using relay boards like this.
    https://www.amazon.com/NOYITO-8-Channel-Optocoupler-Automation-Industrial/dp/B07BLWZQZB/ref=sr_1_3?keywords=24V+relay+board&qid=1573411478&sr=8-3
    They have diode's...
  18. Re: double rack on single pinion to remove backlash?

    Build one with a bigger belt?
  19. Replies
    7
    Views
    86

    Re: Picking a stepper motor

    Oriental Motor (Vexta) is one of the top brands.
    Most people buy no brand Chinese steppers, as they tend to be much cheaper, and still perform well.
  20. Replies
    401
    Views
    1,856

    Re: GME's New 80/20 CNC Build - My Design

    I posted a link to your post on the JointCAM forum. Thanks for sharing.
  21. Re: AVID CNC PRO 48x48 Purchase (Mach 4 Concerns)

    I wouldn't worry about it, as Avid will provide excellent support for it.
    There are probably well over 100,000 Mach3 users, and anyone that's used both will tell you that Mach4 is much better....
  22. Replies
    24
    Views
    129

    Re: Mach4+ESS or Acorn?

    Depends on the programs. There are cabinet programs that can generate g-code themselves.
    But you'll still need a machine control program.
  23. Replies
    7
    Views
    39

    Re: enroute and aspire

    What are you expecting to do?
    Does your Cabinet Solutions export .dxf files and a cutlist or parts file (CSV)?
    I believe that the Pro version of Enroute can work with that much better than Aspire....
  24. Replies
    4
    Views
    24

    Re: ESS MB3 Index homing

    Sorry, I'm not familiar with Mach4 homing.
    But I would think to home with both a switch an index pulse, you'd need a custom homing script?
  25. Replies
    7
    Views
    39

    Re: enroute and aspire

    Enroute comes in different versions, with different levels of features. Enroute Pro is much more powerful than Aspire, but costs more than 3x as much. They also have a subscription for $1100/year....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4