Assuming you have floppy disk to usb modified machine.
you'll find this if there are too many files on the usb stick larger than the capacity of the machine.
create some folders to dump files into...
Type: Posts; User: Jorg_Aussie
Assuming you have floppy disk to usb modified machine.
you'll find this if there are too many files on the usb stick larger than the capacity of the machine.
create some folders to dump files into...
The Alarm 123 spindle drive fault has been haunting the 2004 20hp vf3 at work for some time now.
randomly during warmup or other times with no real load on the spindle.
I've gone through and...
re upload param list????
Hey thanks DouglasR for your reply. It seems email notification isn't working for me either.
Yep she's a 1999 model doosan,
somehow rigid tapping may not be tuned in properly as I followed your eg...
Weird I can't see the attached file from any other pc, nor can I edit the post above...
"G97S250 M29 P11
G99G84Z-0.625 F0.0625"
I used this format but in metric
again the machine gets to the position and sits
attached is current parameters if anyone could shed some light ?...
tried this and no alarm
I see hope....
versatility kills production time.
set more parts per cycle is the best solution.
also tool change to the first tool at the end of the program with next tool pre-stage to save time.If you are like...
hi , by p-cool I assume it's the programmable coolant nozzle?
I know air flows through the spindle bearings for a long time to oil the bearings and prevent coolant ingress into the bearings
are...
Had this also with insufficient air pressure even if it didn't throw the low air alarm, tool changer arm would stall during tool change.
Hi Thanks for the reply.
I'll give it a go with the mdi option.
from memory when m29s200 was programmed it just sat there with no alarm.
I have also found a trouble shooting guide with...
Hi all
brief intro
Live in Australia, Queensland, Goldcoast.
I'm a qualified fitter turner with cnc experience since 1988
Machine controllers used; Haas and Fanuc.
Machine types
Lathes Mill...
try iscar