To be a little more more specific...This part is 6mm long by 8mm at the largest diameter. I'm running it on a swiss lathe holding it on the large diameter and have the endmill in a live drill...
Type: Posts; User: hodaken
To be a little more more specific...This part is 6mm long by 8mm at the largest diameter. I'm running it on a swiss lathe holding it on the large diameter and have the endmill in a live drill...
Hey guys,
I have kind of a unique problem I hope someone can help with... I'm side milling a small 304 ss part and the process breaks through into an id feature at one point. The problem is...
THANK YOU ALL! I'VE DECIDED IT'S NOT WORTH THE RISK.
Hey all!
I'd like to add a 110 vac outlet to each of our cnc lathes rather than put cord drops at each machine. What is everyone's best idea for doing this???
They are just standard D batteries. We have used plenty of generics in the past with no problems, the last two sets were actually Duracell Industrial.
Hey Guys,
I have a Citizen A20 that keeps killing the four D-cell batteries that maintain position. They are plugged directly into the amplifiers, and there is no sign of corrosion, dirt, loose...
So... I'm back to trying to solve this problem again...we had the machine up for a couple days, turning it on and off with no problems. Then out of the blue I now have the safety check alarms again,...
Hey all,
Replaced the Z2 servo motor and power cable yesterday because we had a burnt cable on the motor end. Now I have this alarm, and need some advice. Thanks!!!!!
Hey all,
I am trying to backup some programs from a citizen a20 with fanuc 32I control. It uses a 1GB CF card and PC card adapter. I can save programs to card at the machine, and they show up...
471342
So, i believe i found the menu. (pic attached). As of right now the machine is powered up, and the only one on the list that is showing anything odd is X0008. Bit 7 is different, and bit...
That is good info!! Thanks! Any idea where i can find this menu?
Good morning all !!
I have a Miyano BNE 51sy that is currently setup to run with a edge 12ft barfeed. I need to know how I can run it as a chucker without using the barfeed. Currently it will...
Fanuc series 32 I. Coolant level sensors is working, prox switches for knockout are working, this machine appears to not have a knock out overload sensor... we check the 1amp fuse every...
The alarms occurred in the reverse order listed in my post. I checked the function of the e-stop, and it is working. To my knowledge, there is only the one on the machine. There are two on the...
Hey all,
I have a Citizen A20 that will randomly throw up the following alarm when first powering up and they will not clear....Sure hope someone can help !!!
OT0501 (X1) - OVERTRAVEL (SOFT 1)...
Has anyone ever experienced a Swiss lathe making randomly long (like .300 too long) parts ?? this is happening on the main spindle side and is in the middle of the part.... sub side dimensions seem...
only one hole per peice, but possibly hundredd of thousands of peices
Dick,
It is a .09 x .500 deep flatbottom with a .110 counterbore .085 deep. Currently drilling .005 u/s and boring the .09 dia and counterbore. having problems with consistent size and the...
Hey All,
Brand new here, so if I goof up, ill apologize now...lol
Ive been racking my brain trying to do small (les than .100) id work in silicon core iron and not having alot of luck. Was...