Did you take it apart ? If they are anything like mill gearbox they are fairly simple with straight cut gears and pretty common bearings
Type: Posts; User: wildhorsemfg
Did you take it apart ? If they are anything like mill gearbox they are fairly simple with straight cut gears and pretty common bearings
I have 2 identical machines .. same GOtek on both .. works fine one one but never can get it to work on the other ... I have replaced it and usb drives and It always gives errors ..
All i can...
Bobcad crashing ? no way :lol
best thing I ever did was quite using bobCRAP and switch to fusion 360 lol
Seems like if you looking for someone older and cheap . parts are going to be a issue on all of them .. I've found LOT of fanuc parts cheap on ebay and even bought cards and drives .. but...
Not sure if this the right area to post .. but I have a F25 with sub spindle .. live tools , dual turrets that I'm thinking of parting out .
Its a OT control and I know the ...
thanks that kinda of makes sense but I don't think that's not the problem , even with a G90 > G54> G00 X0.0 Y0.0 it will wont always apply the offset or move to there .... but sometimes it...
There is neither of those on this control
So I've had 2 problems with the 15M machine and I think they both are related
#1st being if you are at say G54 X0.0 Y0.0 and you go to jog or mpg and move say Y +6" . ...
Not old compared to Machines people are still running with actual outdated controls like 6T , 6M , or 10T or my newest .. a 15M :banana: ...
I've thought of retrofitting...
seems crazy to me to "retrofit" a machine with a control that new esp when its not even having any problems , :confused:
guess like usual .. I have issues no-one else has heard of .. :confused: anyways I have switched from bobcad :mad: to Fusion360 and if I post as force Radius arcs everything works fine...
well yes , I did read what the code meant .. I just dont see how it could be causing a problem . The 11M manual shows that is a acceptable code
not sure why I said 6M ,, its a 11M :)
so I have had this before in the past and never really been able to figure out the problem ,,, randomly when running a g03 it throws this PS191 alarm ,.,
Accumax with 6M fanuc ...
BTT ,,, still cant use the machine untill i get it wired ..
Bought a 95 supermax rebel 1 few months back ,
a place was loosing a building and wanting it gone . anyways some one removed the z limit switch ..
I found and got a new one online for 120$ but...
Yes my tech got it fixed ... :D
If its same model Chevalier he could possible fix it also .. guess the circuits are not that complicated for someone who does that sort of work .
PM me with...
surefirst emailed me the schematics ... i have a local tech working on it now but seems as if more may be wrong than first thought ...
Chevalier SURE FIRST DM422 RAM-TYPE EDM
need wiring schematic for the Z axis servo spark gap controller .
Board says PCB2 257020 ver 1.2
board burned a trace and transistor . ...
found the problem , it was the toolchanger ..
air cylinders must be sticky and dont always return all the way home .
i didnt think it was Z neglect ,, becuse when that is on .. the numbers...
so i was gone a week and come home and Z will not move .. (x and y work fine )
its on a accumax if i remember correctly .. mill m11 control
tried MPG and jog buttons ..
cant do from a...
use ubuntu :) . i actually use MINT .. but its ubuntu based ..
no . ... i use it far to much manual .. lol
if a had a cnc 12" engine lathe ... that is really what i would use more often .
so it sits in the state it is currently in ,,,,
i am slowing...
no with the brake . low speed . and feed burnout . it wouldnt sell for as much as it should . esp around here .
motor mounts , i will post pics as i do them ,. i am not sure yet on the X
here is...
here is a harding i bought 2 weeks ago at a auction cheap
i plan on doing a EMC2 cnc retrofit with servos and spindle encoder , and maybe a c axis
it is a 12"-13" harding , super precision...
yes that worked , thanks
it actually didnt have any pause time , so i put 50ms to be safe lol
cody
ok , ill try that when i go back to the shop
that makes sense , it used to work fine so something must of changed
i am using Cimco to upload btw
cody
most of the time when i try to upload a program into my 11m control
i get this error
SR824 Buffer Overflow (rs232c_1)
what causes this ?
and how can it be fixed ?
thanks
cody
any manuals for the 11m control ?
problem fixed
tool changer settled and was off a limit switch
but there was no errors ... was a strange problem
cody