Problem solved. I pulled the spindle air oil pump apart, and there were bits of crap in it...cleaned that, filter was good. Put it all back together. I swapped the spindle air oil control...
Type: Posts; User: MBX5
Problem solved. I pulled the spindle air oil pump apart, and there were bits of crap in it...cleaned that, filter was good. Put it all back together. I swapped the spindle air oil control...
2000 vintage My4 with 16i-m. Issue started yesterday. It's not a normal Spindle Air-Oil fault that you can reset at the unit itself... This time the power drops to the spindle air-oil unit and the...
Ahh I found some broken wires buried inside the ATC head. Repaired and hopefully this thing will roll again. Will post update.
Its a Daikin system.
What's odd is that in Maintenance mode the ATC will cycle just fine.. I tried and tried to make it trip but couldn't... This only happens when a tool change is called in...
I have a 2000 Mycenter 4x w/ 18iM control. Has the tool carousel and the pain in the ass ATC.
It started blowing the #4 breaker when the ATC arm is extended...every 2-3 tool changes or so... ...
Hello. I just purchased a Hwacheon HI-ECO 21HS machine. Fanuc 18T control, sub spindle, live tooling. It has some mechanical issues - sub spindle was crashed, and the linear bearings on that axis...
Thanks. I realize that. I've moved other machines and I am a robot integrator so we know all about what can be damaged, etc... Was looking for specific info from someone here who may have moved...
Moving a Mycenter 4 to my shop. Seller has a crane to load. I don't have one to unload.
What do I need for this? Sheet metal will not be removed - it will be on the machine. Any particular...
Thanks for the info.
We're going up Monday to check out the machine. What else should I be looking for?
I am also having "runaway" spindle issues...it's a baldor drive, not a SWEO however...my problems are almost identical issues as OP although my speeds don't fluctuate....just no control over the...
So running MDI if I do an M3 S3000, the spindle will start, but by no means is it at 3000rpm... No manual control on the dial at all. I cannot stop the spindle with the e-stop button still even in...
I had some mechanical issues on x axis - replaced thrust bearings and a motor....good to go...
Now spindle problem. Start the spindle manually, then hit stop - air shuts off but spindle keeps...
I have an older Fadal 4020, and need some more VMC capacity. I currently have a SuperKia Turn LMS that I am considering trading for a 2000 Mycenter 4 Kiti with a Fanuc control, pallet changer,...
1995 machine. Recently PM serviced. Motors all tested "caution" when meggered. So recently I had some overcurrent alarms on X-axis. Figured right away motor issue....new motor, same problem. ...
Updated post - here is the system running a completely rebuilt 2040V vfd pump, with new omax on/off valve assembly. Running perfectly. I scrapped the Jetedge min-hopper idea - that thing was a...
I ended up finding that the 5016 parameter was way off. So I turned the stock, measured, got the tool offset...then wen't back to my tool setter and touched off, got that offset number. I...
Just wondering if the Oi-TB control has an option for ethernet communications? The year of manufacture of the Oi-TB is identical to the Fanuc RJ3iB robot CPU which has an ethernet port on the main...
So I have a Super Kia Turn 15LMS. Fanuc OiTB control. Just mustered up the courage to start running (I am coming from a Fadal 4020, so this is a little more intimidating to me)....
Anyway - I am...
Making a few changes to the system. I had a complete Jet Edge system that was on a robot. I am using the Permalign II on/off valve and nozzle/head, along with min-hopper and a pretty sweet high...
Thanks. Actually thats where I am with the machine right now. It is an older unit, so it has a poppet-style check valve, and doesn't have the on/off or dump valves. Right now I am using the output...
I have a quick question regarding the nozzle on/off solenoid. My machine does not have one, however a friends Maxiem machine does. My machine is wired for one, and the software is running the...
1995 4020HT. Just filled the spindle refrigerant tank with 50/50 distilled water / Dowfrost. Next day its almost empty. I can't seem to see where its leaking - no puddles or evidence of a leak...
230300
Cosmetically its.....well, rough. It functions though. I bought it from a GM auction so the pump has a bazillion rebuild parts with it. Just got the monitor retrofit done yesterday. ...
Getting the high voltage power run to the machine, and getting water over to it. I put a little bit of time in inserting a 19" LCD monitor into the bezel rather than what was there before....
...
Ok I wanted to chime back in again. I ended up buying a brand new PC with the latest software on it. Installed it all yesterday, and the machine runs just fine. I have not installed or tested the...
Waiting on it to come in. Was wondering if the manuals for this machine are available online? It doesn't come with a chip conveyor and I'd like to look at the pan sizing ahead of time if possible. ...
Doing some cleaning under the way covers.....reading the manual:
"To keep the EMC & TRM running smoothly, it is crucial that the ballscrews are
lubricated with MOBIL SHC #32 grease at least every...
GM auction the other day. Roughly 1/5th the price than from a machine tool dealer. It was a total crapshoot, haven't received it yet - probably after the holiday. Not sure the year - looks like a...
Looking into some live tooling machines....what's the difference between Conquest vs Talent vs Elite besides age? Is quality better with one over another?