I am new to milling pvc foam sheet.
When i cut from inside while profiling i am getting good finish on waste but on sheet.
When i cut from out side i getting finish left over sheet.
I want to...
Type: Posts; User: Junaidzia
I am new to milling pvc foam sheet.
When i cut from inside while profiling i am getting good finish on waste but on sheet.
When i cut from out side i getting finish left over sheet.
I want to...
That was for my client thankfully i changed his mind.
He planned to put that sheet in mild steel frame.
Sent from my Redmi Note 3 using Tapatalk
Sure my friend
First i will try on smaller sheets just to be sure
Sent from my Redmi Note 3 using Tapatalk
This is the design i am willing to cut on my cnc rauter.
This is the first i am going to cut cement sheet i want to avoid wastage of [emoji383] money.
Size will be 8×8 feet.i will cut it two parts...
Bits,Feeds and speeds for cutting fiber cement sheet
Sent from my Redmi Note 3 using Tapatalk
Hello everyone
Plz recomend bits,feed and speed for cutting fiber cement sheet as well.
Thanks in advance
Sent from my Redmi Note 3 using Tapatalk
Although there are ball nuts specially for that perpose
Sent from my Redmi Note 3 using Tapatalk
Not special nut same nut used in rotating ball screw mechanisms.
https://uploads.tapatalk-cdn.com/20170731/ff1f514e831c232d44b33b483d605d8b.jpg
Sent from my Redmi Note 3 using Tapatalk
Thank you very much
It will help me a lot 😊
God bless you
Sent from my Redmi Note 3 using Tapatalk
Thanks
That means i only need to buy ac servo motors and drives.
As you said i am already using reduction 1:2(timing belt and pulley)
I am rotating nut.
That cured my motor stalling and...
Sent from my Redmi Note 3 using Tapatalk
I did same
But it reduced my max speed by 2000mm/minute.
Is there any way to make it more fast.
Sent from my Redmi Note 3 using Tapatalk
Thanks I agree with you
But i guess giving current is not in out hand it is taken by motor(source).
Is it like my motors will consume more current than it is rated?
I am sure if it is so there...
Hello There
It took me 3month to build cnc router
I am wondering where did missed
My specs are as follows
Working area:4*8 feet
Actuation:TBI ball screws 3210 2510 and 1610 for xyz axis...
I have milled tripple edge finder on my cnc machine.
I don't know how write vb code.
It would be great someone shares vb script with me.
My mail is [email protected]
Thanks in advance
With...
I have generic mach3 breakout board and i am using powerflex40 vfd i have tried everything but i can't control spindle speed from software.
Breakout board has inbuilt pwm control.
My doughts are...
Please suggest specs of bearings for my 2.2kw air cooled spindle
I have recently bought chinese spindle from local supplier.
Due to lack of info i didn't make order by myself on aliexpress....
Have u completed with your project
I am going trough same problem.
I am not getting speed above 137ipm
Well that's frustrating.
Is there any problems with that?
Sent from my Redmi Note 3 using Tapatalk
Yes dude
Sent from my Redmi Note 3 using Tapatalk
Hi everyone
I planning to build 4×8 laser cnc laser cutter.Highest working material will be MS sheets around 3-5mm.
Can anybody suggest me power of laser tube i should buy.
Sent from my Redmi...
My name is Junaid,I'm from india
I am just newbie although i have completed my first
cnc router which is of 5*10.
Thanks to cnczone.com
lots of doubts cleared.
Thanks a lot ,😊😊😊😊