Hi All,
I’m hoping to get some more assistance. I had to remove the main board from my machine and enter all the parameters afterwards. All of the parameters where documented. My question is on...
Type: Posts; User: copper460
Hi All,
I’m hoping to get some more assistance. I had to remove the main board from my machine and enter all the parameters afterwards. All of the parameters where documented. My question is on...
Hi,
My lathe with a 3T acts the same way when homing. The U and W can be zeroed but not the other axis’. On ZRN my machine does go all the way to the limit switches. I’m sure you can change it...
Thank you all again for your input. I thought some of you might want to know the final outcome. With the help of a friend, we were able to trace the problem to the RS232 receiver chip on the main...
Thank you camaro_dan67.
Thank you zavateandu
Thank you cnc.techie. I appreciate your response. Second Question: I see the A16B-1000-0010 board ending with 07f, in my case. I am guessing that this is a revision level for the board. Would a...
Hello All,
I'm doing research at the moment, but believe that our main/motherboard in our mill, FANUC 3M-C, may have been damaged by a short circuit. It has the fanuc3mdripfeed.com chips on it. ...
Thank you CitizenOfDreams. I'm going to run it and see what happens. If it acts up, I'll definitely solder a new capacitor.
Thank you Jim. I appreciate the feedback.
Nice to meet another Oregonian and have some overlapping interests. We're in the Timber industry.
Hi All,
I purchased a Takisawa TP-3 Lathe knowing that it had some issues. One alarm pops up on the X axis. The machine will home fine, but after moving the axis it will not go home again...
What questions do you have? I might be able to help. It's been awhile since I've worked on a Tornos.
Hi FoxCNC1,
There is a guy on youtube, JOHNGRIMSMO, that was cutting foam on their mill. It might contain some good suggestions, if you haven't already found a solution. I think it was for their...
stiffethomas,
The aforementioned comments are good. AutoCAD is a good 2D program. You draw lines, circles, polygons, etc... to create a perspective view of what you drawing or designing. The...
Hi All,
Would someone have a program, that you wouldn't mind sharing, for a Tornos GT with Barfeeder? Preferably a GT26, but anything will help.
Thank you,
Good Morning All,
Does anyone have a good source for training on Swiss machines? Specifically Tornos GT26.
Thank you very much.
Hi Everyone,
I wanted to see if anyone has had experience with Tornos support. Installation and tech support. Or is there anyone on the west coast that specializes in Swiss setup and...
Hi johnd,
I can share how our Star with FANUC 3T-C operates and my FANUC 3M-C. I hope it helps....
On the main control we switch over to "MDI". Then on the input buttons there should be...
Good Morning/Afternoon,
Does anyone know if when you list the programs on a FANUC 3M-C, should the 9000 programs be visible? It's for an old VMC. Can anyone share with me their 9000 programs, so...
Hi diyengineer,
An old friend told me "Speed costs money. How fast do you want to go." :) I apply that idea to several things.
May I ask what kind of milling machine it is?
If the...
Good Morning,
First off, thank you for your time. Many of us are very busy. :)
I have a Leadwell MCV-550S, and I am learning the in's and out's of the Fanuc 3M-C control. Fortunately I do...
It is a Fanuc 3M C
Stephanie2928,
I would look at the "print" settings when you send the job to the laser. Could it be re-positioning the text to the "center of page" or something like that? Or that the laser...
deadlykitten,
You can also Save As a dxf from a sketch, in a part file. When you do that it will give you the option to specify the origin where you want, regardless of what the origin is in...
cktim94.
Does one of these pictures look like what you want to do?
Good Morning All,
I am looking to find a manual for the Leadwell MCV-550S CNC VMC. Fortunately I have the FANUC manuals, but I trying to find a manual for the machine itself. Any mill manual...
Hi Again,
I found the answer I was looking for basically, in the power requirements. It requires 40 amps @ 220V, 3 phase of course. Thought I would add this in case someone else is searching...
Hello All,
Can anyone tell me if a late 1980's Leadwell MCV-550S only came with a 10HP spindle motor, or did it have options for other sizes?
Thank you for the help!