Search:

Cutting 2 different diameter with the same tool, first a 3 inch than a 5 inch . If I set the 3 inch diameter right on than the 5 inch diameter is .003 bigger. If I set the 5 inch diameter to be good...

Hi Dave, do you know how to engrave on the face of a part that has a bore following the bore radius ? So far I can only engrave in a straight line. Let me know if you have any thoughts on that. Thank...

I'm using Manual guide i to engrave a part around the bore, but for some reason the text not following the bore radius.It would only engrave in a straight line. I'm using XC plane. Any ideas ? Thank...

Nice macros ! I would love to have these for slot milling. Anyone ?

Thanx ! fordav11

If it's not canned cycle than Fixed cycle, so I don't have to manually punch in 5 pages to rough it out.
PART OD=7.300
SLOT LENGHT=5.710
WIDTH=1.772
DEPTH=1.000
Here is the shape...

This is a new machine fanuc Oi-TD control 4 axis
I need an example program with explanation for Slot milling canned cycle along the side of the part.
Thank you