Thanks Victorofga
Here is the first part of the code:
T01
M03S2000
G00 X-514.35 Y-401.1117 Z10.
G00 X-514.35 Y-401.1117 Z10.
G00 X-514.35 Y-401.1117 Z6.
G01 X-514.35 Y-401.1117 Z0....
Type: Posts; User: makaplan
Thanks Victorofga
Here is the first part of the code:
T01
M03S2000
G00 X-514.35 Y-401.1117 Z10.
G00 X-514.35 Y-401.1117 Z10.
G00 X-514.35 Y-401.1117 Z6.
G01 X-514.35 Y-401.1117 Z0....
Hi everyone
I run NCStudio 5.5.6 on a 32-bit Windows XP PC. I recently started getting the following symbolic message which causes my machine to stop:
...
Hi Victorofga
No, I'm still running the same system. It luckily hasn't broken yet!
However, in the last few days I've been getting the following error message which causes the machine to stop:...
Hi all
I'm trying to figure out what control setup I can use for my CNC router (a fairly old JCUT 1630B with Leadshine MA680H drivers). I'm having trouble with the PC that I'm currently using to...
Hi CNC gurus!
I have an old CNC router (model JCUT 1630B) with Leadshine MA680H Microstep Drivers. I normally control it using an equally old 32-bit PC with Windows XP and NCStudio V5.5.6 but I...
Hi all
I'm a complete newbie to CNC, but this definitely seems wrong.
1. Whenever I set the origin in NCStudio and then move to the origin, the head moves in the positive Z direction by 3 mm. I...
Hello from Canberra, Australia. I'm getting acquainted with CNC on a very used JCUT 1630B which I'm running from NCstudio. I suspect I'm going to need a bit of help over the next few weeks!