After one here ... your information is still helpful:d thanks and sorry I didn't answer fast.. but somehow I found a 110v fan. Now I want to make it shut down after 2 minutes machine non running.
Type: Posts; User: Cosmin90
After one here ... your information is still helpful:d thanks and sorry I didn't answer fast.. but somehow I found a 110v fan. Now I want to make it shut down after 2 minutes machine non running.
Hi rodney,
Thanks for your advice but is not attached any picture. :-??
Hi alex,
Can you help me with q picture where to insert the prybar.
I have some position errors on this machine. I checked the procedure but for me is not really clear.
Best regards,
Hello Sir,
I opened the covers of 4020 fadal and no chance to see the mettering valves.
How you can do that without lift the table?
Best regards
Hello,
I buyed a fadal with A axis... I found the A axis amplifier is burn.
Inside cabinet I found other amplifier, I instaled it but now when I start machine (without moving A axis) I have a loud...
Do you know where the fan is connected in the cabinet?
Hello,
I'm old spindle fan took a big chip inside and now is broken.
In romania is pretty hard to find anything with 115v.... someone can help me with this info:
From where to take a connection...
After change baldor 8kw rollbearings, i reinstall everything. My 4020 run just low rpm, without responding of knob or code to increase rpm.
Tool D8, Z4, HELIX 45degree(I know is not the best for Al)-carbide L 10mm out of holder.
AP 8MM
Ae 0.8mm
Contour operation... error 0.5mm, material AL 6083.
I think deflection is not the...
My fadal have an error of 0.5mm error dimmension in soft matterial(al) and goes to 1mm in mild steel.(I need correction 1mm to have good dimension).
Maybe someone can help me from where to start for...
Is a fatal 88hs. I move a little bit the resolver and machine run noW, i don't know for so long...Im scared
A little. Is expensive to import in Europe. Like 300eur for delivery. :(
Hello guys,
Maybe someone can help me, finally I succeed to take a big order and I have the first big problem after an E stop.
The X axis is the only one with problem, if is ZY everythink works...
Please help me with this info. I need yo buy like spare parts. Till now it still working
Can you tell me where is located, maybe a way to check it.. .machine works perfect without 4th axis.
Today I checked just 1010-5 card.. i didn't know I have other unit responsable with my 4th axis.
Today I change the cards with X cards, error was the same ... axis A. Also today I disassembled the motor, I cleaned the old oil, check the backlash... everything is great there.
Someone have other...
Today I tryed to use 4th axis. But i can't use CS command because I recive #18 error for A axis. I wanna mention is a VM65 ... and when I can't turn the chuck by hand.
Best regards,
Shipping cost are like 350eur.
Duties 15eur... so is ok.
Hello,
Someone know what is the specification for pozi belt?
Length, distance between ribs, width, thickness?
If I order from USA the price for delivery will be 5 times price of the belts.
...
How much you ask for this setup? Or you can help me with RS232 command for every but... to make a "virtual keyboard" is all I need. I don't like at all to use MANUAL keyboard, then go to pc and send...
Hello, you solved this problem? I need to refil my fadal after 10-12 hours ...
Thanks a lot, is very helpful, today I saw I have all the time spindle load at 30%. Is to much and how i can solve this?
Thanks,
Thanks for your answer, I have this kind of belt https://itscnc.com/bel-0024-p-236.html?osCsid=a2e348467f613587a37fe57bc5d01f51. Is a possibility to happen this because the air compressor didn't...
Hello,
I just buyed an old fadal, 96'... I'm used to work with HAAS.
After spindle off, i just usem M3 in MDI to start again at other speed... a lot of smoke and a "squealing" from belt area....