i usually go by what im doing, if im using a drill bore style gun drill i will chuck at 300 psi. if its light drilling and turning then i go lower like in the 200 to 250 range material only matters...
Type: Posts; User: Jcowles1986
i usually go by what im doing, if im using a drill bore style gun drill i will chuck at 300 psi. if its light drilling and turning then i go lower like in the 200 to 250 range material only matters...
The company i work for just bought a used Hwacheon cnc lathe.
Id like to get a jump start with the programming and any other information i can get.
It has dual spindles and one turret. Fanuc...
when touching off on the star, just go to MDI
t100-t600
g0 x.dia of bar
then after you pop the new tool back in
and snug of the bolts
g0 x1.0
to raise the tool off the bar and tighten the...
Hey just wondering if anyone out there can give me a sample program on how to tap from the y axis as im getting an alarm when trying to use the g784 rigid tapping cycle.
the message reads "78 not...
Depending on how old the star is you might have to do a a G1 with tap feerate in and then stop spindle,reverse spindle and G1 feed out with tap feedrate.
Ive seen it done on Citizens cincom F12.
The company i work for just bought a used Hwacheon cnc lathe.
Id like to get a jump start with the programming and any other information i can get.
Can anybody help me out?
Cowles Customs
Located in Port hope Ontario
Manual machining available
So far machines I have a Hardinge turret lathe and a milling machine. Looking mainly for second op work
...