I removed this little motor and connected to 12v motor rotate but I think is not strong enough I can stop easily by hand
I been looking trough Internet to find this and no result,so any idea where...
Type: Posts; User: petextr
I removed this little motor and connected to 12v motor rotate but I think is not strong enough I can stop easily by hand
I been looking trough Internet to find this and no result,so any idea where...
Hello all Bridgeport users
I have problem with my Bridgeport vmc 1000 xp heidenhain itnc530
basically when i try to change tool trough mdi or from program i get error tool pocket not down and...
Hello all Hitachi seiki owners -experts i need some advice i want to purchase Hitachi seiki machining centre and i have 2 options vm50 and vk45||
vm50 is 98 year machine is disconected...
I looking for heidenhain 5 axis post do you have any
Hi, I have same problem did you sorted out ?
Thanks
I already replace 4 transistors , still get SDU Alarm straight away after machine power up, also burn base circuit fuse KM10 on top board , i try few time and always burn same fuse , today i was...
repairing cost 2500€, , i have chance to get another complete working drive for 600€ but is D11 from LB9
Hello All
I have problem with my Okuma Vac drive II D8 , getting alarm 110 alarm A SDU1, i can't fix this drive by my self , so i have chance to get another vac drive but is D11, i compare this...
Hello
Did you get sorted this problem with vac drive ?
I have same problem and local tech can't repair
Any sugestions?
Hi.
Did you get 5 axis postprocessor for Heidenhain ?,i need looking for them too
thanks
hi, did you fix your machine i have same problem any advice how to fix?
thanks
I think some of those relays are responsible for control solenoid valves
I find 2 relays that could control ,I will replace them with new ones from RS and see what happens ,otherwise i have no idea...
I have same problem with my LB15 chuck not open or close , but this is happen randomly time to time , i did check valve and solenoids looks them working ok , cant open and close in MDI, looks its...
hi. everybody
i have problem with setting zero point on the subspindle on my HT20SII cnc lathe with seicos multi control , i have this lathe for while and no need to use subspindle since today , i...
Hello everybody , looking for delcam feature cam post for hitachi seiki ht20SII millturn c axis and live tooling , no y axis, that could be fanuc post ,
my feature cam is 2012 and i try use...
Need help , in my lb15 bubble memory board dead, so i get another one from plc centre, and i m not sure how to load system software from floppy drive , i read maintenance manual and attempt to load...
Welcome
I looking for external floppy drive for okuma lb15 osp5020l cnc lathe 1990 year , floppy drive missing and i need one to load system software because bubble memory died .
So anybody have...
Hi .
I need some advice , i plan retrofit my old bridgeport mill and i think use dmm 750w servos and dyna 3 servo drive , my plan is run servos at 3000 rpm to make machine bit faster , and i think...
Do you have manuals?, i have same machine and i need manual for programming
what you think about nema 34 1805 oz hybrid steppers and micro stepping drives and run them on 11o v i think is strong enough to run BP
Welcome all , i currently looking for some cnc kit to retrofit my bridgeport interact ,and i found 2 kits one with servo motors High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit, DC...
hello; i have bridgeport interact 2 tnc 150 and using sheetcam as postprocessor and DNCSOFTWARE to send programs and when i tried send some program to machine got message on screen;...
HI i recently bought Bridgeport interact 2 and i don't have 3 phase line in my garage ,and i wont run this machine from 3 phase converter ( transwave ) but i don't know what power bridgeport have...