The machine is a SV-503/40 with fanuc 18i-m model a
The alarm 410 for z-axis will randomly pop up when I unlock the door or m30 is commanded in a program and the z-axis brake is engaged.
I...
Type: Posts; User: cheenky
The machine is a SV-503/40 with fanuc 18i-m model a
The alarm 410 for z-axis will randomly pop up when I unlock the door or m30 is commanded in a program and the z-axis brake is engaged.
I...
The only electrical manual I have for the machine is the electrical diagrams manual. no keep relay or data table settings in there, nor any ladder diagrams, just the schematics for the most part.
...
Thanks for the reply gentlegiant, the machine says EX1449 '[G1102] sensoring tool on spindle'.
edit: also in the 'Coil' column of the error code manual, it says 'PER1449' not sure if that means...
When I set a sensor tool number in the register tools page, it won't let me M06, M19, or M33 in MDI mode without getting an EX1449 error code while that tool is in the spindle. Is there a setting in...
had a tech come out to fix it today. apparently there isn't a factory/official solution to this problem. the workaround was modifying the parameter for the program memory size (don't remember...
Control is the 0-TTB. I tried the PWE=1 power on w/reset but no luck. the alarm is on head 2 side so I'm thinking it somehow needs to be booted on in the head 2? I had both head 1 and head 2 PWE=1 at...
the manual says that the cycle won't start if the spindle is in neutral. not sure if the motor being out of the machine will affect this.
i'm not sure but maybe that control requires the chuck to have the closed signal for the cycle start to work too. also not sure how the MDI will react to a G50 command maybe try inputting a single...
i think you need to hit cycle start after inputting your mdi commands
Need some mechanical work done on a ZL-15S w/0-TT control and was hoping someone in here had a good tech they could recommend. Feel free to reply in this thread or send a PM. Thank you
Hi, I posted this in the Mori lathes sub forum as well and figured maybe someone familiar with the 3-T might be able to help me.
Problem:
Machine is a SL-0H w/ Fanuc 3-T control. When I press...
Machine is a SL-0H w/ Fanuc 3-T control. When I press the spindle forward button in jog/handle mode nothing happens. In MDI mode with s500-> m3->start, the cycle start LED turns on but spindle still...
thanks!
Anybody know what oil to use for the turret lube? gearbox and z-axis feed box use ISO VG32, is it the same for the turret? the seal around the sight glass sprung a leak when i wiped it down the other...
Dan,
thanks, i may have a look, but i've been messing around with visualturn and haven't been able to really grasp the basics of it (maybe a couple of hours of looking through it). from what i...
If anybody has either hard copies, soft copies, or xerox copies of any/all of the manuals for a Nakamura Tome TW-20 w/ Fanuc 0T-B control for sale, I please PM me or respond in this thread. I have...
thanks for the suggestion turmite. i had used the free version of Rhino quite a bit maybe 6 or so years ago. i'll give it another whirl and see how i like it.
edit: upon a quick inspection, i...
thanks for the advice and suggestions. outsourcing the programming was an option that had come to mind and is still an option i am considering. i'm fairly comfortable using solidworks, am seriously...
not sure if your machine came with the optional "GIF-02" board or not, or an aftermarket BTR (behind tape reader). i know for the factory "GIF-02" board, you can use the info on this website:...
currently I have a mori seiki sl-3 with a yasnac 2000gII control, a matsuura mc500v mini master with a yasnac 3000gII control, and a nakamura tome tw-20 with a fanuc 0t-b. as of right now the only...
i would check that your feeds, speeds, and depth of cut are within the insert manufacturer's recommendations. doesn't sound like a problem with the machine.
any recommendations for technicians that know this control in the los angeles area?
yep, it's got the crt monitor. but i've been having numerous issues with this control so maybe those options got wiped out or are no longer working. i think there's a problem with the memory, as well...
unfortunately the control didn't come with any of the g70-76 codes enabled :violin:
i do agree some CAM software would be the easiest/most productive solution, but as of right now lack the funds...
thanks, i'll give that a try.
sorry, been trying to deal with the lathe randomly shutting down on me again (thought i got rid of those gremlins).
dcoupar- i don't have the original program as i got so frustrated i just started...
the control is a yasnac 2000gII.
i attached a jpeg to depict my problem
so i tried using G41 on a program i made for a part and a few things ended up being off. one being a decreasing diameter...
also forgot to mention that i can't write to parameters 38 (k-address), and 39 (any address). i wonder if these have anything to do with my t-code problem. probably gonna have to call a tech soon....
ok well after cleaning all the control boards, the machine stays on without any issues.
does anybody know the parameter to enable using 4 digit T-codes? the machine will only recognize 2 digit...
so far besides the z-axis issue everything else seems ok except the control shut off on me while i was leveling the machine. i remember somebody else having a similar problem on this forum and their...