eBay Link:
https://www.ebay.com/itm/173628611049
$650.00 USD
Local Pickup only.
1. 2010/2011 GibbsCAM 2 and 2.5 Axis Milling for Sale
2. Standalone with Permanent License and USB Doogle....
Type: Posts; User: gangpw924
eBay Link:
https://www.ebay.com/itm/173628611049
$650.00 USD
Local Pickup only.
1. 2010/2011 GibbsCAM 2 and 2.5 Axis Milling for Sale
2. Standalone with Permanent License and USB Doogle....
Haas Tech show up on Dec 20, 2017
Reload parameter, problem solved.
$421.00 for the job (3 hrs approx. reload two Haas machine parameter)
Haas Tech show up on Dec 20, 2017
Reload parameter, problem solved.
$421.00 for the job
Lost parameter after replacing 3V battery.
System is up running with No alarm,
Except won't load my original .par file (2012 parameter file format comes with the machine)
ALL the SETTING is...
Need to reload Haas VF1 parameter after 3V battery failure.
System is up running with No alarm,
Except won't load my original .par file (2012 parameter file format comes with the machine)
ALL...
Problem Solved:
2066 alarm means "toolchanger not in the home position", called Haas factory tech support at Oxnard, CA
We did the RECOVERY toolchanger (F1), now it is all good, running as it...
Thank you, it is very likely something to do with the software in the control.
email/phone call with HFO this morning, they has no clue what the 2066 alarm means, so disappointed. they will...
Thank You very much for the help on this issue.
347138347140347142
1. I had no issues/alarm as far as I can remember.
2. the onboard 3V battery was replaced by HFO back in Jan, 2015. Ever since,...
347014
Unable to run the machine until clear this 2066 alarm code.
RESET is not clear the 2066 alarm whatsoever.
tried:
1. completed power down with main breaker off (No help)
2. Call local...
Bad part # 59-2832B
The internal cone shape rubber seal deteriorated over time.
1. Machine was purchased June, 2012, just pass the one year warranty. This is a six months problem that I had with this 2012 Haas VF-1
2. For the past six months, Haas Tech has show up 4 times,...
Problem found, it is one of the solenoid part went bad. See attached195464
Thank You Mike, will do ASAP
1. 2007 Haas Mini mill, all the sudden starts making abnormal popping noise upon release/grab the tools in the spindle.
2. Tools still change fine, just whenever it go through the spindle, making...
Well, We don't use this machine as 24/7, power up once a month, cut few things and sit there most of the time, we only get to see this LOW BATTERY Alarm few time during the past years.
In the...
YES. I have shut this thing down and turn back on dozen times by now, still getting this colorful screen, nothing else. I DID had "Low Battery "alarm for the past year, never bother me since it goes...
Aug 5, 2012 Sunday Morning, power up my 07 Haas Mini Mill, all I get is the colorful boot up screen, Nothing else come up on the screen, press "RESET" and "POWER UP", it beeps, but nothing else show...
see attached. (UG format and JPEG as well)
How do you actually machine this part on a CNC lathe?
Type of tooling?
any sort feedback would really appreciated.
pw924 at yahoo dot com
1. Any chance get this belt change on your own?
Looks simple, but really appreciated from anyone done this before or had similiar experiences.
2. Any speical steps to Disconnect and reconnection...
email me at [email protected]
I have 2007 Haas Mini mill myself, running with Gibbscams 2010 Mill 2.5D as well. My processor should work for you.
How do you edite my original message? anyone care to point out for me. Thank you
gibbscam for sale location: Los Angeles, California
2010 gibbscam Mill PKG completed, $2200 obo
It comes with my old copy of gibbscam 2004 as well.
It is sort useless since I had the 2010 gibbscam DVD and USB key.
Gibbscam comes with the One year...
SEND ME YOUR EMAIL at [email protected]
I have the Gibbscam tutorials
Same as you are, newbie with gibbscam
Bijur / TM1 Lube Pump 110vac/4 Lt/ #36158
$65.00 from ebay auction
anyone know anything about this Bijur lube pump will be compatible with the Haas SL-10
Can anyone point out to me HOW TO MOVE OR DELETE THIS POST?
I have already post a new thread in Haas Lathe forum
Thank You
2002 Haas SL-10 low lube alarm
--------------------------------------------------------------------------------
Recently purchased 2002 Haas SL-10.
1. Pull up the pump handle by hand, the...
pw924 at yahoo.com
Recently purchased 2002 Haas SL-10.
1. Pull up the pump handle by hand, the pressure gauge shoot up to 40psi, and gradually drop in pressure in 10 minutes period.
2. Run the spindle at 300 rpm...
Recently purchase one set of Haas Mini Mill 2007 and SL-10 Lathe 2002, move from seller garage to my home garage.
YouTube - haasmoving_dvd.wmv
what to look for buying USED 1994-1999 Haas CNC lathe and Mill, such as SL20, VF-0, VF-1? Spindles hours? Gearbox?
How much they should cost in good condition?
Any suggestions are welcome