Works great https://www.ebay.com/ulk/itm/332985484839
Type: Posts; User: ChrisT88
Works great https://www.ebay.com/ulk/itm/332985484839
Got the chuck in two days from Chino CA to South Florida. Definitely not bad for 10 bucks in shipping. Chuck looks really good considering the price but smells of diesel and is leaking what I guess...
Looks like the 5" 4 jaw chucks will do every bit of 5". I also 3D printed a 6" faceplate that seems to clear the bed just fine so hopefully the jaws stick out no more than an inch or so. I went ahead...
I need to turn some 4" stock and currently don't have the means to drill a proper center hole(rebuilding G0704) to enable chucking the 4" stock to turn between centers in my 3" vise. So I decided...
Thanks Dave. I have definitely factored in the poor ways/saddle on the Grizzly which are much worse than the Precision Matthews 45 I have experience with but plan to work the Grizzly into shape even...
I think the prices have gone up since then as I was quoted $98 shipped from Chai for 3 double nuts by themselves. I ended up buying two NSK 1605 C3Z 850mm ballscrews for $198 shipped. I was really...
Hi Russ, I considered this but there are plenty of 14-20mm Japanese C1-C5 screws from surplus sources that shouldn't run me more than $300-350 for the X and Y which includes a pre-turned end with -32...
Finally found a seller on aliexpress but the price is fairly steep at $95 shipped for 3. I really only need two I guess as X & Y are the two big ones but I cant help but think I could just go strait...
Hi,
I have a G0704 that I just finished converting to CNC and after testing the backlash found its far from ideal at 0.02"+ with the gibs slightly loose. If I remove all slop in the ways it turns...