On my 6040 cnc router ive had a problem with the stepper motors ticking and causing dislocation. I tried slowing the feed rate down like alot of people have recommended but its still doing it.
...
Type: Posts; User: koolkleptokidd
On my 6040 cnc router ive had a problem with the stepper motors ticking and causing dislocation. I tried slowing the feed rate down like alot of people have recommended but its still doing it.
...
Ill try it out and ket you know what happens
I have a 6040 cnc 4 axis that is co trolled by mach3 and its giving me some problens with dislocation. Whenever the motors are spinning they randomly hesitate and skip forward causing the workpiece...
I have a 6040 4 axis cnc router I bought off ebay a while back and I just cant seem to get it working properly. I was wondering if there was any way to possibly have a technician come out and look at...
I have a 6040 cnc router setup with mach3 and whenever i run a file it is always offfsetted on both ends of the workpiece, for example whenever i do a pocket cut on one side it steps down like a...
Does anyone know where i could find plans for a nice toolbox like this one?
I tried the d020 and d040 setting and it does the same thing.
Its 120v
I did put all the settings in place and I changed it to manual.
ive tried them all and it turns on the spindle but it only stays at 144.6
Ive tried the settings and I cant get it to work, is there a difference between if it has the 800w of 1.5kw spindle?
i've tried asking them before but all they do is keep sending the same manual to me.
I have the 1500w spindle motor.
Mactec54
Thanks for your help, i appreciate it
yeah, ive checked it multiple times and cant find anything, I attached the manual if you want to read it.
Do you know how i can find it? Ive looked all over the Internet and cant find anything on it.
Recently I bought a 6040 4 axis cnc router off of eBay and the instructions didnt have the right settings for the vfd that came with it.What should I do. I attached the manual to the thread THANKS.
A couple months back i bought a 6040 cnc router off of ebay and ive been able to find the information for everything but the vfd, Ive looked all over the internet and I cant find any info on it....
Recently i bought a chinese 6040 cnc router off of ebay and ive had some problems getting Mach3 to control my machine. I followed the instructions included with the machine but whenever I try to load...