Search:

Found out how to get the hours but couldn't find the edit button. 234738

Location- 10 miles east of Nashville, TN
This Haas Mini Mill is in great condition,Low Hours and loaded with Factory options. Is under power
2006 Haas Mini Mill
Programable Coolant
Rigid Tap
4th...

Thanks
I need to take a minute and give Chris and EZ-Cam a little praise! Relatively new user of Mill Pro (7 months) and they both make my day so much easier! Great program! Support is second to...

Give them a call with your computer on and they will be able to take over and show you on your screen while on the phone. Really good support.

This one will handle 11 cfm and matches your comp. Its free shipping and reduced price.
D18IN Ingersoll Rand Refrigerated Air Dryer 5HP (11 CFM)

I run into the same thing. I just search for h* now and scroll up a few lines. Might help out till you get your post figured out.

Looks like your not the only one. Check out post 20 might be some help. Good luck!

New Haas Machines and Grease vs Way oil??? - eMastercam.com

Clogs at the end of the lines or is there debris getting in the oil clogging it? Ive seen some very small oil lines on lots of really old machines and they were all working fine.

Well I know it sounds crazy but I have it working now. I reviewed things that have been changed since it worked flawlessly. First Thing I had broke a probe stem and when re aligning it may have got...

Thanks for all the advice. My tool setter is hard wired. I dont have a usb port but will check this weekend when I get back to the mill and see if the macros are on a floppy and try reloading.

Thanks for the help. Cleaned everything and it is still not working. The beeps are way more frequent now like it was a couple weeks ago when it first started. I even took the probe into another room...

Thanks for the link.

I have a Mini Mill with a Reinshaw probe. The tool setter works like it always has. The problem is spindle probe dont. I get error 1101 Probe start up failure. When the machine is turned on there are...

Ceramic with a positive rake small rad. and from what I remember about 15 sf, .005-.007 doc, feed .003 -.005 makes long spiral chips great finish. Don't get in no hurry. Its expensive stuff for a...

I am trying to get MC5 to move to a safe place to do a tool change without having to manually edit the post. I have tried linking parameters home reference points and no change to post. Is there a...

Quote accepted

Well I just figured out if I dont click "save as" and just click the floppy symbol at the top of the page it doesnt put the .nc after the name and it works just fine. Over thinking MC got me again.

Thanks for the response. I was thinking it should work too. Thats one of the wierd things. Top of post looks like this before being saved.
%
O00009 (TEST)
When i generate a list with f4 everything...

I am stumped here. I have a Mini Mill and just began using MasterCam. When I save my post to my floppy the control isnt recognizing the .nc format, which is what the machine definition says Haas...

Dont know much about video cards but to me it sounds like something else might be going on. I have a 3 year old laptop running xp. I dont have any troubles. $700 retail running the old stock video...

Got it figured out.

I have had the same scenario and tried a few things to fix it before finally just having them run the first op on all parts then the second. The chuck needed to be clean before running second side so...

Been running cnc's since 85. Today I feel spoiled with the new ones. I currently Program and run a Mits FA10S wire, a couple Charmilles wires, Hard turn on a Mazak Quick Turn, and an Anca PGX punch...

The one at meyergage.com on the right side of the page there is a link to there catalog.

Check page 20 of there catalog. Only a partial list of whats offered. They go up to 3.510 with 2" as a standard length on that page alone.

Its hard to beat Meyer Guage prices. With what you want most if not all will be stock sizes. meyergage.com