smile.gif Hi
Yes its true- one usually plays back the options on the disk- this doesn’t work in your case.
The only solution you have is contacting the service
G. smile.gif thomas
Type: Posts; User: myca
smile.gif Hi
Yes its true- one usually plays back the options on the disk- this doesn’t work in your case.
The only solution you have is contacting the service
G. smile.gif thomas
Mine is from Hoffman ... Interested? -> E-mail address ...
G. Thomas
smile.gif Hi,
"Handbook of Machining" by whom? I also have one - if not the same book, e-mail address would be due ... biggrin.gif
G. smile.gif Thomas
Could it be that I have a cable breakage? Or measuring unit?
:) Hi,
thats a good advice- its best to add an oscilloscope. It will tell you the truth….
Thomas :)
Hi smile.gif
The spindle drive on your machine is a three-phase current motor (no servo), isn’t it?! I am sure it has a transmitter (position and speed) on the fan cover-> check the contacts /...
:) Hi
Oh, tell me another… this is an example.
Greetings, Thomas
:) Hi
The best way is to make a component group – put the jaw and the pipe inside and position. Then edit the jaw (in the component group), insert features, cavity. It always works.
Greetings,...
:) Hi
just take pure pneumatic thick goop. For example Weicon AN 302-77. Thousandfold applied. And concerning releasing: make it warm, about 200°, - then it’ll be removed without any problems.
...
:) Hi
you can also manage it without books – here you’ve got something for the beginning (training course in SWX). Follow the picture attachment.
I attended this course – I’m not suggesting...
:) Hi
And what exactly is broken? Symptoms?
Regards, thomas
:) Hi
as far I know, there isn’t any…
Greetings
thomas
:) Hi
I don’t believe that it would work.
I guess you’ll have to create a new one. The only way – DXF export of the ProE template…
Greetings
thomas
:)
to be able to insert an Excel table (in a component assembly, not in the picture)???
:) thomas
:) Hi
This
I’ve got a component assembly and I’d like to insert an object list.
has look this way:
I’ve got a picture of a component assembly and I’d like to insert an object list.
:) Hi
http://ww3.cad.de/foren/ubb/Forum2/HTML/016902.shtml
The second posting includes fonts that cab be lasered.
Regards, thomas
:) Hi
http://www.gewinde-normen.de/
Greetings Thomas
:) Hi
Probably the time for air flushing is set too long. It has to be corrected.
Greetings thomas
:) Hi Olaf
How do you notice that? Due to tool holder?
Any noises during idle time?
Tell more
:) greetings Thomas
:) Hi,
You program a path, e.g. . Xs= 100, Ys= 0 und Zs=100, Xe=100, Ye=100 und Ze=50. Then you add pattern, translation on linear slope- There you enter the direction, amount and distance (...
Hi
There’re actually 2 variants:
Warped axes or damaged tooth wheels (but I don’t suppose it). I would check the both of them – the concentricity and axial eccentricity of the both tooth wheels...
:) Hi Rainer
I’ve had only good experience (with little exceptions, that concerns also others).
Greetings :) Thomas
It’s a “normal” performance – sometimes with crashes. Auto recovery would be good - provided that everything is saved in “secured” distances.
:) Thomas
:) Hi
XP64 – it works with usual dropouts.
Vista64 – also works – attention during installation – controlling of user’s account! Install with maximal rights! Otherwise you’ll have problems.
:)...
:) Hi
If your graphic card hands it over…
1. it has to have 2 video gates that can be used at the same time (one is attached to the own monitor)
2. 2. Software has to be able to run the both...
:) Hi
A better borer and drill in steps with ventilation. 75mm deep with 5mm…
It’ll take more time but you’ll get a good result.
Thomas
:) Hi
I have already integrated a Bizon’s chuck for about 15.000 € (personal requirements, equipment) – exactness according to DIN – keeps, cost/performance ratio TOP.
Regards, Thomas :)
:) Hi Ralf
I have VMX1 and I’m also itching to update.
If I were you I would wait – there’re still some troubles…
Regards, thomas
:) Hi olaf
sure, if you manage to switch to the windows surface, install Acrobat and open Explorer.
I don’t know if it’s possible without detours :)
Greetings, Thomas
:) Hi
one more notice:
each font may be declared another way in upper fields.
So you should first declare/check each font and then search for ASCI-code
Thomas