Same error code on new SMEC sl2000sy , adjusted radius of tool to a made of value and offset dimension in canned cycle to compensate and working fine now
Type: Posts; User: panaceabeachbum
Same error code on new SMEC sl2000sy , adjusted radius of tool to a made of value and offset dimension in canned cycle to compensate and working fine now
Yes they have lost me as a customer. Do not like being referred to as a liar and a thief just because I live in Florida, actually quite amazed they would employ such a rude arrogant person as a...
Purchased a new SL2000BSY dual spindle lathe from SMEC (samsung) . Control is Fanuc 0i-TF plus, it included a 400 page manual on Fanuc iHMI but the button (rubiks cube) does nothing .
This...
Awesome , that was it Thank You very much
I have a new SMEC sl2000 with Fanuc 0i-TF and when I push reset or a program ends (M30) it clears the offsets for the tool thats loaded.
I have 5 other turning centers, 2 of which are samsungs...
Here is the diagram for anyone searching this issue in the future
Received message from Milltronics, 2CN cable does attach to plug labeled CN2.
Can some one post a picture or a description of where the external keyboard pigtail labeled 2cn plugs into the CPU on RW15 mill The port I assume it attaches to is labeled CN2 maybe the cable is...
I am in North Florida, The HFO in Al is closer but am included in the Tamps HFO. Not that it matters but for reference when someone has the same question down the road. apparently you cannot choose...
I appreciate all the responses. Been a week since I used the Contact Us link on the Haas page requesting someone contact me with no response. Time to move on, just was hoping to stick with Haas since...
And in no way knocking Haas, just curious
10-4 Contacted HAAS thru their "contact us" page on Wed guess I will patiently wait to hear back.
Staying with one brand was the initial plan. We experienced a fire and lost 5 machining centers, explained to Haas that we were rebuilding and would be buying all new machinery and I guess at 4 hours...
Love my current HAAS mill but recent bad experience from a condescending salesman. Can I purchase a new haas mill from a different HFO or do I just need to shop for a different machine?
I was finally able to clear the issue, had to cut off air supply to machine to cause a fault which would allow me to reset then initialize drives
Thanks Bob, thru trial and error I figured it out.
The monitor would start correctly on the 7th time the machine was started, each time the pattern on the monitor was different always starting on...
I thought so also but I seem to remember having to enter a code or something similar.I just so rarely have any issue with this machine
I used my RW15 for the first time in a couple of month yesterday after some trouble getting the monitor to start correctly. Ran parts for the remainder of the day.
Restarted this morning, same...
I was able to get the monitor to start correctly, ran all after noon no problem. Restarted this morning, same problem. Had to restart 5+ times to get the monitor to start correctly.Will call...
Turned on my rw15 for the first time in a few months and this is what the screen looks like. Cent 7 controller
All hooked up and working perfectly.
Laser source is a Maxphotonics 30 watt MAX laser, Max Quality- Maxphotonics Co.,Ltd
Board is from JCZ, listed on their site as co2 or fibre Beijing JCZ Technology CO. LTD
Seems to be the same...
Received my Morn fiber laser a few weeks ago, received the Rotary Kit today. Machine is not pre-wired for the rotary but kit included wiring harness and amp for rotary. Anyone here have any...
started wiggling connectors on the control board and the power wire going into con3 is loose, seems to be the one that provides power to the board. quick re-solder and its working perfectly, still...
Ok thanks, it actually says cant find dog, which I assumed meant dongle
399196
but she was on the floor beside me
399198
I purchased and imported a Morn 30w fibre laser which arrived about 2 weeks ago. The machine has worked very well but when I powered it up today and launched EZCAD 2 it says its in DEMO mode. At no...
I did a few weeks ago Fedex air freight was $800 took about 5 days to get here then an additional $52 in import duties. Pretty simple process
I received a rotary "kit" today for my Morn Fiber laser which consist of a rotary with stepper motor, wiring harness and a CW-Motor digital stepper driver card which appears to plug into com4 on my...
I did, they said I needed the HFO to come reset the serial # and they would in no way tell me how it is done.
HFO did send a tech out after I called HAAS to fuss about the slow delay.
Tech...
I spent quite a bit of time analyzing the cost of parts we produce to justify (feel good about) buying a new machine and honestly if varies so greatly its very hard to pinpoint a round number. I can...