This was alarming to me first time I seen it. I know this is an old post, but this is what its doing for those who do not know.
The machine is "trying" to maintain a straight cut by adjusting the UV...
Type: Posts; User: Changedsoul
This was alarming to me first time I seen it. I know this is an old post, but this is what its doing for those who do not know.
The machine is "trying" to maintain a straight cut by adjusting the UV...
I am working to modify my post to output a value from the "EDM Drilling" feature. I wish to output the value of the electrode diameter used, but the post format is so strange to me and I can find no...
Anyone have any success with this cheap, and I mean that in the worst sense, MPG garbage from china?
I have a laptop running mach3 on it, No parallel port, no serial port, just USB.
This mpg is...
Im not sure if what you have is correct or not, but I think the numbers I have from the customer are not all correct either. Im not really sure what is correct anymore. I think I have much more...
No the correction factor is "-.3". This doesnt make any sense to me, and I know an engineer can put what ever they want on a print, but some of these numbers dont make sense to me.
The print...
I know what the Std Pitch and Std OD would be, but this is not what i was asking. My Main question is how to calculate what an adjusted OD should be. The only info I am given from customer that...
I do agree the difference is not much, but I didn't ask if the difference would be a problem and I deal with tight dimensions all the time, and a change of .004 is allot to me. Also, the spec on the...
Hi, Im trying to match a program output that is giving me a certain modified Spur Gear OD.
The gear specs are:
23T, 20PA, 20DP. Adjusted Tooth Thickness = .06526.
This program that is in...
Funny you just posted that. Im new to trying to wrap my head around different views. I first tried transforming the tool path but could never get it right. Not but 5 minutes ago I figured it out...
Hello, Im trying to draw a part, very simple and see what it looks like in verify but I am stuck as to how to draw and or pick tool paths.
I have a round part mounted in the 4th axis. Face of the...
Hello, I know this is a bit late in response, but hacked exactly what your looking to do into one of my posts. Im a Lathe guy and got sick of my turning tool flying through radii in corners, so I...
Well yes there is always that, but there is a slight problem for me, This software cost allot of money. Most of all though, I am actually trying to write a program to calculate the time it takes to...
This is great, I have just recently been trying to figure this out my self. Thanks for the nice simple formula that works out to be very accurate.
I was also wondering how you could calculate the...