I have a '97 Arrow 500 that's doing nearly the same thing, Axis Drive Signal Missing alarm, and the machine shuts down as if the e-stop was hit. Re-power, confirm tool alignment. In December of '22...
Type: Posts; User: sarms
I have a '97 Arrow 500 that's doing nearly the same thing, Axis Drive Signal Missing alarm, and the machine shuts down as if the e-stop was hit. Re-power, confirm tool alignment. In December of '22...
It's a BDS4 drive.
I have an Cincinnati Arrow. Years ago I bought a Kitagawa rotary off EBay, rotary model TB160 as I recall. The rotary has its own control box. However the machine is pre-wired for another drive.
If...
Thanks for the help and suggestions I'm going to look into good quality digital multi meter.
What brand multi meter do you use.
Since my first post I've tried a few things to see if I could isolate the problem.
One thing was to manually position the table to where the cut starts so only the spindle wind up and z axis move...
My 1997 Arrow 500 is shutting down with an Alarm saying, Axis 'Drive ready' signal missing.
Cause: The axis drive signal has been lost.
Input cr_axes_rdy (100:00/32 is off)
All the drives come...
My Arrow does the same thing. I just put up with it. It air supply is a 200 gallon twin piston. Under opperation the compressor runs every 12 minutes. I'm a 90 psi.
First off, Hello everyone. This is my first post here.
I'm sarms I've been camped out in the custom rifle industry in one form or another for the last 20 years. 10 of those for a major maker the...