I played around some more and found a way to get the wheel to work for X,Y and Z. You have to make (3) different target applications and a button to switch between them. All are identical except...
Type: Posts; User: xtwalt
I played around some more and found a way to get the wheel to work for X,Y and Z. You have to make (3) different target applications and a button to switch between them. All are identical except...
I used the setup software from Contour. I downloaded the Windows 8 version from their website, since the device I purchased from ebay is used and only came with XP drivers.
I assigned keyboard...
I recently setup a Contour Shuttle Pro 2 on my flashcut controller. I use the wheel(s) for jogging Z, and use the buttons for jogging X,Y. I assigned other buttons for slow/med/fast jog rates, and...
I'm not sure how to make the calculation, I guess it depends on the deflection your drawbar needs to release the pullstud. I just put new McMaster springs in mine and I know empirically that it...
Correction - Upon closer inspection my Belleville washers are stacked as (()) repeated 20 times for a total of 80 springs. I'm ordering McMaster Part# 96445K247 to replace mine. Does anyone have...
Martin,
I think your's is the same as mine. Is it possible that someone replaced the screw on yours (mine was missing) with a custom design, and added the grub to lock it? I wonder if you could...
Martin,
Since my spindle was purchased from a salvage dealer, I do not know what year machine it came from. The dealer says it was from a Dyna Mechtronics 4400 and I didn't think to inquire about...
Hi guys, I think I can make a small contribution to this thread. I'm using a surplus Dyna 4400 spindle in a home-made VMC (WD CNC on youtube). I got the spindle on ebay from a salvage dealer, and...
I completely dissembled the vise and found the problem. The bearing on the screw was dragging. I simply loosened the collar that "loads" the bearing and it now moves freely like my D675.
Also...
Thanks for everyone's input. At this point, since the weldment is already complete, I'm leaning towards coating the exterior with epoxy floor paint, and leaving the inside uncoated.
The exterior...
I'm building a stand for my CNC mill from welded steel plate, and am trying to find the best "paint" to coat it with.
My design is like a Haas Mini-mill, where chips and coolant all fall down...
It looks to me that the drag is not from the moving jaw, it slides smoothly. The drag is from the rotating screw in the nut, or the bearing.
Either case, I'll disassemble and adjust - thanks.
I recently purchased a 6" Teco (formerly Parlec) vise from Enco. I read lots of reviews and opinions on Kurt, Teco, Shars & Glacern and settled on the Teco for the best quality/value.
I got it...
I recently purchased a BT30 spindle out of a Dyna Mechtronics DM-4400 mill. The spindle had a single BT30 holder installed, so I was able to at least measure it. Problem is, I can't find anything...
Does anyone know of a good supplier for BT30 spindles? 1-3 HP and approx 3000RPM. I would love to find a cartridge design w/ a build in mechanism for pull stud retention. I plan to belt drive it...