Hello every one,
I have an HPR260xd, and now i am getting an error 20. I can hear the pilot arc like a buzz but do not really see any spark. The gas settings are ok and earth connection is...
Type: Posts; User: shanoger
Hello every one,
I have an HPR260xd, and now i am getting an error 20. I can hear the pilot arc like a buzz but do not really see any spark. The gas settings are ok and earth connection is...
Sorry wrong reply, no I did not yet, I was finishing up some hardware and had some delays I will send you some pictures. I will then try your solution
No the problem is when I press minimize Button close to the X button the window disappears, it's there but does not show. If from the properties of the Mach4 icon I change the window type to normal...
Hi All,
Today I have installed Mach 4 demo version and tried opening the software. At first only the icon on the taskbar showed, then I opened the properties of the Mach4 mill icon and set the...
Oh that's great thank you so much, any input would do i can re wire it, any output would do i will wire it according to the output you specify. I have attached an image of the how the punches and cut...
Thanks again it seems like an awesome idea. I am not an expert on mach 3 and have limited time to try this do you think you can help me out with the macro part to wait for sensor before continuing ?...
Hi all,
I was wondering how I can use CNC controller like the Mach 3 to cut a long flat bar and punch holes in it. What my idea is use one tool to do a cut then after some distance punch a hole...
Sorry for the late reply, this solved my problem. Thanks a lot
Hi all,
In my g code I have set my spindle speed to 15,000 but on the Mach 3 screen it reads 8000. When I try to override the speed it does not allow me to type in a higher number than 8000....
Thank you for your help I really appreciate it.
Thank you for your reply, there are two problem in the picture of the cut material. The first which is not easy to see is the oval shaped holes. The second is that long cut out which has a bad cut at...
I will measure the pinion diameter but my sizes are fine the only problem is that the circle is skewed ? I was thinking could it be the servo response time?
I am trying to attach an image but no luck I will send a link to drop box
I did not take account of these gearboxes how to do that?
How to take account of different ratios in mach3
Hi all,
I have recently installed my machmotion controller to my old router table powered by Delta ASDA-A2 servo drives. Y and A moves the gantry forward and backwards and have 1:10 reduction...
Greetings every one,
I have a plasma CNC machine (china make) has a simple 3 Faldic servos and hypertherm microedge controller. The machine is power via a large 3 phase generator. The works fine...
hello every one,
I have a cnc machine with a Y axis controlled by a 0.4KW ASDA servo motor. The motor shaft is connected to the ball screw via belt. Now i am trying to make the movement smooth...
i tried both files and they both failed to load, then i did some tinkering with the g-code you sent me and what i did is remove the G03 command entirely and it worked, the controller was able to open...
i tried both files and they both failed to load, then i did some tinkering with the g-code you sent me and what i did is remove the G03 command entirely and it worked, the controller was able to open...
i tried it but the controller is saying "file non existant!" its as if the controller does not recognize it.
i checked your file again and it worked perfectly on the hypertherm microedge controller but this file did not work on this chinese controller i have from googol tech? is there a reason why, the...
the code did not work on my controller and is just giving me an error i have attached the post that came with sheet cam, the output Gcode of a working file. i am confused. Thank you
Greetings,
I own a powermax 65 which i use on my Cnc machine, lately it gives an error 30 every two to three minutes. I changed the consumables, cleaned the torch body it self, replaced the...
Greetings,
i am a little confused, what is the voltage divider settings for ? what are these ratios 20:1, 21.1:1, 30:1, 40:1 and 50:1 , what do they indicate? i want to use powermax 65 for...