Search:

We have a 3018 ProVer.
We are using Vectric Aspire and outputting to the GBRL.gcode post processor.
Unfortunately, the machine generates an ERROR3 code, when we attempt to run this file.

Does...

Hello All,
We recently ran a grounding wire through our dust collection hose, to alleviate static buildup.

However, that wire is now causing material (mainly wood shavings/fibers) to get hung up...

This issue was resolved.
There is a single line in the wincnc.ini file.
We changed "holddir=0" to "holddir=1"

This setting apparently sends extra pulses to the motors when set to 0.

Is...

Has anyone tried TurboCAD?

Hello Gerry,

We can certainly try changing the acceleration again and see if that has an impact.
The thing is, Camaster default settings in WinCNC are 400. If setting it down to 50 does have a...

Thanks for the response Andrew...

The bit is not slipping up into the collet. If we "reinitialize" the machine, and then re-run the job, it starts normally. The z starts where it should, but...

Hello All,

We have an ongoing issue with our Camaster Stinger III.
SPECS:
1.7KW Spindle
Design Software: Aspire v9.015
Control Software: WinCNC

When we carve any 3d model that contains...

Hello All,

We are selling our CNC Shark HD3 Extended Bed, and are looking at two other company's products.

Axiom Pro or Elite
and
Camaster Stinger 1 or Stinger 2

Do any of you have any...