Thanks for bringing this back up I should have come and updated it!
I could not figure out the problem but a great guy in the Seattle area did find and fix it.
My original board had a blown fuse...
Type: Posts; User: Rover31
Thanks for bringing this back up I should have come and updated it!
I could not figure out the problem but a great guy in the Seattle area did find and fix it.
My original board had a blown fuse...
Could you please post the prices? Or send me a message/email.
Thank you
Could you give some details on the units that will be available
Thank you
So right away I want to thank all of you who continue to post and share opinions. I learn tons just with a few comments from all of you with experience. Thanks so much for helping!
I have actually...
This is exactly where I am at. I am a start up hoping to learn and produce a little at the same time.
I am very sold on the Probotix nice looking machine. Shipping to me across the country is...
Well it looks like it is down to CNCRP vs Probotix since timeline never responded to either an email or voicemail.
So in the CNCRP line the Pro is certainly a better machine but do I need it at...
Steve,
Could you update this post?
Did it work?
Thanks
Russ
Thank you very much for your time!
I will be ordering a new board today.
It is odd how this started and ended I am sure that I complecated it.
Unless one of you experts chimes in I am...
Had a great chat with a consultant cnc router guy today
He mentioned the shopbot along with Probotix
Lots of things/needs were talked about vacuumed table flood irrigation/water evac
Made my head...
10 min later...
Ok so unit is unplugged
flip the driver over...
plug in and power up...
and ... no change, the extruder is not moving. All other axis function as they should.
So I think, well...
hmm I see said the blind man...
That is a great page, lots of good info.
Thank you for the pointer, I will report the results, that is if I have not fried something.
I have in fact, looked at...
like this pic does that help?
I did plug it in with the regulator in the same position, that is not correct?
How about this one?
how is this view?
I agree,
How do I go about testing the power regulators? I am seeing several things online but was hoping to get pointed to a more focused test that pertains to 2560 boards.
Thanks again!
Sorry need to be more clear, let me back up,
The extruder motor was not fully functioning, sometimes it would work most of the time it will not.
I unplugged the extruder motor and plugged it into...
Excellent info thank you much!
Sooo much to learn!
automation has some very interesting items also
Yes I did do that and it worked.
Then I replaced the stepper driver and it still did not work.
I am now trying figure out do I need a new board or something else.
Thank you
Is there an FAQ link that any of you know that would show how to test the 2560 board of my 3D printer.
Symptoms are the extruder stepper motor is not working. I replaced the stepper driver that did...
hmm those look nice, free shipping and welded table to boot!
more options I like it
What electronics did you go with? You are happy with it?
Thanks!
Thanks for the tips.
The c-beam is "more rigid" due to thicker side supports over the ox metal? More accurate then?
I should also say I would likely be using a vacuum table. Will that make a...
add this one that I just stumbled upon
Affordable quality CNC machines - Gryphon CNC
HI folks
I am an absolute beginner at this. I am going to be purchasing a cnc router for a small business that I have. We will be routing plastics 3mm-1cm thick.
have looked for several months at...
Folks, I am still on the hunt for a good machine. Routed products will be 3-5mm plastics and some wood templating jobs.
I started going down the diy route but quickly figured out it's not
Much...
Awesome thread with great info.
I am looking for the same type of machine.
Thanks to all who posted! I learned a ton.
Looking at the size of the vacume plates I purchased and the video I posted below, it looks more like a cnc mill not router table was used.
Something maybe like this?
SALE CNC Router Milling, CNC...
I would really like to be efficient and do all cuts/routing in one pass.
This is what I am trying to duplicate.
This is a smaller size machine than suggested by others here. Does anyone recognize...
I will be cutting HDPE and recycled HDPE
I have been doing lots more reading, looks like I will have to try the dry method!
THANK YOU
I agree it is a complex issue but I do know it can be done. The finish edge on the plastics that I have from that process are very very nice.