Has anyone got a tool change program for a Chen Ho Mcv-1000 with umbrella type tool change?
Control is a Fanuc Om.
Type: Posts; User: brentpinfold
Has anyone got a tool change program for a Chen Ho Mcv-1000 with umbrella type tool change?
Control is a Fanuc Om.
I managed to get it working. The batteries were flat on the cmos card. Ill put new ones on and still didn't work. I then removed all the jumpers on the card and it loaded the control software exactly...
I just installed a cmos card to replace the bubble memory in our lb15 with osp5000 control.
Im trying to reload the control tapes but the tape keeps stopping and it doesn't produce any errors.
Is...
Take the batteries out. But this will wipe everything so make sure you have a backup of your parameters and diagnostic parameters.
awesome can you send them thru to me please?
Hi
After a year of the lathe being down I put new bubble memory in the machine and loaded the control tapes.
The machine now has an alarm 150 alarm-a coupling device illegal 4.
I seem to recall...
Hi
I've picked up a Mori seiki Sl-4 Lathe. Its been in storage for a few years and now wont power on.
Ive narrowed it down to the brown plug the plugs into the main board. With this unplug the...
parameter 394 bit 6 is 0 already.
Tried that and its active. Ive used alot of machines and ive never had one do this before. I know some machines when you set your work offsets dont change the abs until you hit reset but this one...
I have an old machine centre with a Fanuc om control.
I move the machine to the position where I want x0 y0 z0 to be.
I copy the machine coordinates to work offset 01.
When I go to auto and press...
I have an O-t as well. They both have a rotary switch to toggle the mode to zero return. On the O-t I have to press x+ and z+ to send it home. The O-m I can hold the + button and send it home. But it...
Ive tried this but still moved the wrong way. This parameter will need to be changed though. I did try switching the z and y. They both still moved the same way but went past home and came back to it.
Ive just brought a 2nd hand milling machine. Everything works fine except when i try move the machine on x axis in the negative direction the numbers and the machine move in the positive direction. ...
Sorry it took so long to reply the machine has been busy.
We can't do a up/down load a file.
I changed the i/o channel to 9.
If we put the machine in dnc mode then go connect, host, oprt, board,...
We have a hartford mill with a fanuc ai200 control. We have the control connected to a computer running a ftp server. We can see the files that are on the computer on the control but cant figure out...
How well is the aluminium plate secured? I would try 9k revs 30 - 45 ipm and 0.125 doc with the 1/4 end mill. Sometimes by pushing a weight (lead) on the centre of on the job or by where the tool is...
I have a puma 12l with fanuc control. Ive had this probelm before and tried everything thats been mentioned. What we did to overcome this was go into the parameters and change the stored stroke...
The fanuc technician came with a new memory board yesterday. Installed it and still had the same problem. He then wiped all the data and it worked.
After that he put the old board back in and it...
I run a daewoo puma 12L Lathe with a fanuc ot-c controller. I had a 25mm bar sticking to far out the back of the spindle which resulted in the bar bending to 90 degrees and damaging the guards. Also...
In edgecam i use a roughing canned cycle. But when i use the finish cycle for the same profile it puts the coordinates in for it twice.
For example this is what im getting
n1 g71 u1 r1
n2 g71...