Search:

The Optimum Bf20l is manufactured in China.

Hi I am considering purchasing one of these Chinese AC servo motors NEW 10NM 2.6KW AC Servo Motor Drive Kit 3ph 220V 130mm 2500RPM 10A 3M Cable | eBay#. I know it is a Chinese oem brand but I don't...

Donald j Trump 2016. Make America Great Again. Go out and vote!!!!

Hi Tom,

Thanks for the quick response. Sorry for wasting your time, it turns out there is no problem I just forgot to disconnect the kanalog when powering it up with 5v outside source, but I had...

Hi,

I just started setting up the kflop. I put 5v @ 0.5A and this powered the kflop without the kanalog plugged in, but if I plugged the kanalog in, neither would turn on. So I upped the 5v to 2A...

Here are the addresses for the Leadshine protuner for ESD-508 and HBS507

ES-D508 protuner

- ES-D Series Easy Servo Drives / Closed Loop Stepper Drives | Leadshine

- it looks like the same...

Hi Darko,

I'm considering getting an AC Servo for my spindle drive. Did you get yours sorted out? are you able to drive it in mach3?

regards.

Hello,

I also purchased this motion controller. I have had problems with the motors shaking erratically, the spindle speed control does not work, motors move without command and don't stop on...

Hi I bought the same driver off of ebay also. If you are English speaking this may help you.

- For the manual just go to Leadshine Technology - Home and download the manual for the ES-D508 drive....

Hi I have the Leadshine HBS86H driver and the HBS507 driver. I can run them both with Protuner fine however when I use my mach3 motion controller only the HBS507 is turning the HBS86H will not turn....