Search:

%
O00011

M06 T20
G00 G90 G55 X-3. Y0.
M03 S6500
M97 P20
G00 G90 G55 X-3. Y0.
M97 P20

I don't think it's possible to send/receive files w/o being in front of the machine.

Some customers here use this feature successfully, even for inspection or modeling (to copy some part damaged and stuff).
It's also possible to take out the results by DPRNT command.
You can set...

Forgive my ignorance, but... what a hell is this "Espirit 4.0"??

Try the following:

T#501 M6 (tool call);
... (machining code);
IF [ #[5800+#3026] GE #500] #501= #501 + 1 (at #500 you will manually set tool load limit value);
... (you must repeat it for each...

The code is a little confused and it's impossible to help you without having the subs (P7000 and P8000).
About the code, Haas machines use no G20 (inch/mm selections is made by setting 9) and...

Please subscribe us with the values set on settings 22 and 52 and the part program and so we can help you.

Cheers!

Just a tip: For those who use version 16 software, it's enough to open USB area and type F4.

What is your issue about probing?? Maqybe we can help you to settle it...
Cheers!

Anything is possible to be done about VQC programming, once it's file like any other one. You just need to pull out VQC template (at List Prog), using USB, than you can edit some template according...

Alright, now we have your original code, it's quite easy. It's correct that inform G58 only load this information to the machine, but it does NOT command any movement. But, once the coordinates...

Zero point is not adjustable by software, cause it depends on the physical zero microswitch position (at least I think it works this way, I'm not from technical assistance department). About...

Kojack,

If you loaded A62. B180. into Work Offset Table, as G58 postioning angles, you should only call G0 G58 X## Y## Z## A0 B0 (just as makingchips said) on your code and it should work.
If...

It should count the whole time since Cycle Start was pressed until Reset or M30/M2/M99 processing.
I've noted some situations where the time was not right on version 15 software, but it's perfectly...

Here is a list of all settings I use to change for my customers:

16 - Dry Run Lock Out - ON
Dry run feature can be dangerous if unproperly used. If you want to use it, so turn it OFF only for...

I've just ran your code downhere at HFO and found no problems with the structure (only some alarms related to circle interpolation coordinates).
I used 3 different files.

If the problem persists,...

It's not clear if you are putting the main program and the two subroutines into the same file or as three different files in the mamory (because the % sign appearing only once). If you are using the...

We are here for any doubts and I'm sure your local dealer also. Feel free to post any difficult about the control or send any drawings from the parts you need help about programing and tooling:...

Just to clarify, Haas control's lookahead is 40 blocks (there's an option for 80 blocks available, call your dealer for details) and YES, the control looks and prepair the next tool.
There's also a...

About the program you can be pretty sure there's nothing wrong. Just like you told, there are different styles of programming, all of those are correct. The doubt is still floating in the air......

Only to reinforce my point: if the tool that is loaded into spindle is the smaller one (T15) and the machine is executing the operation f the longer (T30 and considering lenght offset value H30), the...

I had ran several machines and softwares (i.e. Mazak - Mazatrol, PC Fusion, Matrix - Heller - UniPro80 & 90 - Mori Seiki, Okuma, Brother TC series, Mitsubishi Softwares, Fanuc 0i, 16i, 21i, Gleason...

The machine didn't skip only tool change, but al the comands between N1 and N2, because if it has processed G143 H30 no damage would occur. So, it's very hard to accept this situation, but if you are...

Directly from Haas Mill Operator's Manual (pay special attention to the end notes):

"G150 General Purpose Pocket Milling (Group 00)

D Tool radius/diameter offset selection
F Feedrate
I X-axis...

8 - Prog Memory Lock
must be OFF

23 - 9xxx Progs Edit Lock
must be OFF

74 - 9xxx Progs Trace
must be ON for graphic simulation purposes only

75 - 9xxxx Progs Singls BLK

I'd be glad in help you. So, let's start: first of all, I need to know what a hell is a "kidney slot" (please e-mail me [email protected] with drawings and variable dimensions for your...

Directly from Haas Mill Operator's Manual, I found this information:

"COMMUNICATION WITH EXTERNAL DEVICES - DPRNT[ ]

Macros allow additional capabilities to communicate with peripheral devices....

Hi, guys

I Know I'm just a beginner here, but at this pont of discussion, some settings can be useful for those who posted their coments:

29 - G91 Non-modal
This is for those who don't use G91...

Taylor,

3 or 4 weeks ago a customer downhere in Brazil had the same doubt for an EC-1600 HMC brand new machine. The question was submited to Haas Apps Dept and I personally don't know the final...