Thanks for that But i only have DeskProto, SheetCam,SolidCAM and Vetric listed in the Post Folder :(
Type: Posts; User: tommyb43
Thanks for that But i only have DeskProto, SheetCam,SolidCAM and Vetric listed in the Post Folder :(
"Tested On SolidCAM, MasterCAM, ArtCAM, SheetCAM, Vectric,"
I see from the Mk3/4 Documentation that it was tested on Mastercam.
Can Admin point me in the right direction to these Post Processors....
Awesome Thanks Gixy
Awesome Buddy Thanks
Hi Guys just trying to set up my software at work and was researching Postprocessors for work machines.
I use PlanetCNC at home and was looking to find a postprocessor for Solidworks, Has anyone got...
Did you ever get this to work ?
Do you have any completed for download ?
Hi Peteeng
Thanks for the reply. Just thought the update on TNG software would have a calibration section like the old CNCUSB
Seams silly that there is no function for tuning the motors.
my...
hi folks do we have a section in settings for calibrating the motors i am loosing 2mm over 850mm and would like to tune the steps.
thanks Tom
Thanks Andy much appreciated (Conquest GT27 Got ya)
I am based in Northern Ireland and have just started to research the machines we have to get as much information as i can for the lads running...
Any Body ?
Hi Guys and Gals
I am looking for information on a Hardinge Conquest GT-CE
I have been in the hoby laser and cnc for a few years now.
The Boss an work found this out and passed the cnc shop onto...
Now it won’t recognise the controller and driver is latest one installed
Sent from my iPhone using Tapatalk
OK got this installed and working Thanks to Planet CNC Tech Guys :)
Next Question Stepper Current I Have 4 57 two-phase 3A 150N.cm Steppers and work well
The Board Gets Very Hot and i am a...
Hi Folks I have just purchased an Mk3DRV
I need help with the wiring of this board to replace the Chinese clone in my 6090
any help would be appreciated
I did send an image of the controller...
Will Do Buddy is feels like top secret sometimes getting simple information or no one carves cylinders
Have a look at GCode Ripper it has a Wrapping feature but i need to give it some testing as well
Hi Eatonbrayer
I have been testing loads of different posts and found Mach2/3-WrapX2A ATC (mm) works but i have been checking every move in the code
and it seems to work OK but i am still testing
Thanks for your reply I will hold on until its released then i have no idea of programming script :-)
Have you any idea about which post processor to use for Rotary carving from Vectric ?
On file G-Code Wizard CNC USBhttps://www.cnczone.com/forums/attachment.php?attachmentid=392822&stc=1
On CNC TNG User Definedhttps://www.cnczone.com/forums/attachment.php?attachmentid=392824&stc=1
Hi Folks
Can anyone point me in the direction of a Processor that will Wrap a job in USBCNC
I have tried all the Mach 3/4 Wrap posts but they come out flat and 200 mm off plane
Aspire has an...
Hi All what has happened to the Gcode Wizard in CNC TNG ?
I have used this to make cylinders from blocks now its not there
User Defined list don't have it either ?
Also what post processor is...