Search:

Aiight. I got it working. Thanks to those who tried to help.

I will upload my current parameters later in case anyone else finds this thread in the future.

Well I ended up just getting a new VFD and will run the spindle manually.

But I don't know how to program it for my spindle. Any help?

Spindle info:Power: 1.5KW
Voltage: 220V
Frequency:...

How would I adjust them? These are the dxxx?

Just to be clear...the VFD is totally unresponsive. E CH stuck on display. None of the buttons do anything so there needs to be another way to change...

Here are some more pics of everything in the controller box.
...

https://www.cnczone.com/forums/attachment.php?attachmentid=422526&stc=1

- - - Updated - - -

And thanks for taking the time mate

Well, I did what the seller instructed me to do and...nothing. It did sweet FA.

So I emailed and let them know, and also mentioned I only tested from MI1 to MI4 (I mentioned this because in their...

Eastern suburbs, Melbourne.

I totally agree!

But I hadn't heard back from the seller for a while st that point, and online searching and forum posting didn't seem to be leading anywhere so was happy to shell out a small...

The seller FINALLY got back to me. Here is what they said directly quoted from reply:

"First connect the" COM "port inside the control box with a wire and connect the" MI1" to the other end....

Could I just buy one of those el cheapo vfd's from ebay (~$80AUD) and run the spindle manually from that?

They did not. I've found manuals online but cant be 100% sureits for my one.

Nobody? Dang! This is not good...

Hello all,

I've got a 6040 PRT-E1500w from ebay.

My VFD is non responsive. It is stuck displaying an error code which I cant seem to move past. All VFD buttons are unresponsive. I don't know...

Thanks for the reply. Sent you a PM ????

G'day, I need four simple 3D parts to be CNC milled from 20mm MDF. If anyone can do this then I'd love to hear from you. Thanks

Hello.


Beginner here. Currently about to start building my first vacuum forming rig. Platen size will be 43cm by 83cm with a top down/overhead oven.


I was initially hoping to use 4 × 500w...

G'day everyone.

I'm new to this.

Therefore, I am after some advice before I go go making my first mould, and my question basically boils down to this: How much detail can I get from 3mm ABS?
...

Just to be clear...I want the radius on the corners. I just wanted to make sure the small 4 by 6mm detail would come out with 3mm ABS.

Amd yeah I just drew the drawing with sharp corners on the...