Search:

Mach3 has also Screw mapping.

I would like very much to see this option available in UCCNC , it is very important in machines of 2000 to 3000 mm screw lengths (large routers) !
If you need...

Hey CT63 it is not my fault that CNCdrives has so much troubles in life with internet !!

If you are the guy that likes making recommendations pls. tell Uccnc to find something new to do that...

good video ! thanks for your experience.

Thank you Camara, good to read your experience ! It is also interesting the comments you make about mach3 and uccnc.
When you say both run equally smooth, are you cutting 2D or 3D files ? Some...

Hi BlackForest, Gruess Gott.

I suffered the same problem as you, they did never answer our emails, even that we bought 2 systems from them and had some issues, we had never been attended by this...

Jfong
there is a limit of axial rigidity in a leadscrew system that can not be braken even with high speed servos.
Because of its long length with respect to other components, the ball screw...

Beefy you must know there are lots of types of STEPPER MOTOR brands, not all perform equal with the same drive.

A stepper + a drive is a marriage, you have to find the right match. One of the...

A_CAMERA

in the prof. business you have always circuit braker contactors operated by charge between the motor and VFD (as you pointed out) ALLWAYS !. They will isolate the motors in case of over...

It is silly to read a recommendation of Vmaxxxx about Vfd... triying to guess what to say.

CAHIT you can for shure programm your VFD to accept EXTERNAL COMMANDS for START STOP from your input...

ger21 , Read the post of A-Camera telling UCcnc was not responding emails because they were "under attack" , and read the posts of VmaxXxx saying" they were to busy" to respond to customers ...

I see no point to bring arguments if the price of U$S 60 is cheap or expensive, when this
was never discussed.

It is really a case of FALSE ADVERTISING what I , and Dave Gulton, are talking...

Is good to know that you defend a company that does not answer technical Emails to customers ! And you talk about beying polite ! This is a new joke or what ?

If they do not answer technical Emails to customers that payed for the product, customers will go that way for shure !

Ok good to know that to receive any answer from CNCDrive we must use a "special kind of English", there is a fellow using a special Uccnc version, where the problems
we experienced did magically...

You want to know What I am complaining about ?

Then read my posts.

Of course they are not cars without tires, your examples are not a valid .
Because the companies you mention do NOT sell the software WITHOUT the needed Hardware. They sell a COMPLETE CAR, ready...

Transparency and a clear business for everyone , these points + excellent support were the keys of Mach success :

I went to the Mach4 web site, and it is perfectly clear WHAT they sell,...

Ok Beefy, thank you very much for all your effort and explanations.

Unfortunately Vmax was aggresive with me from his first answer, I was always polite to him asking only for advise.
He accused...

Hi Ger21,

Probably you do not understand, that CNCdrive is selling a Car without tires.
They sell the car and the tires, but sell them sepparately.
It makes really no sense to buy 60U$S for a...

Hi Olfcnc , in my case I emailed 2 times to [email protected] ,for 2 months ago after I received the products, (with 1 week in between) but
I never received any answer.
Then I asked my reseller...

Is good to know you are always lurcking here , attacking customers that payed money for UCcnc software , and receive insults and agressions
from employees of UCcnc company like you ?
I have seen...

Excellent ! Olfcnc I will try this. If you say this works well,this is fine ! // In case of trouble I tell you.

In case any other user knows something about the ** User Password... ** it...

Hi Mr. designery ,
I have nothing to complain to your initial post.
I left my opinions regards all this bull**** in the OFFICIAL NEWS ::::: The UCCNC Web Forum is OPEN FOR BUSINESS (;-)
if you...

Thanks !

I downloaded this version. It has the "Loadfile" function I wanted to test, even it was resolved for some 2 weeks ago (with thanks to user Olfcnc).
Even that is working well, I had no...

For many years CNCs rely on Windows Embedded technology for example, FIDIA, FANUK, OSAI,
etc only to mention some well known brands that rely on Windows technology for the user interface and ...

Hi Andy,

I regrett very much the problem you had with this company.
It is very similar to mine.
I bought 2 CNCdrive systems (not directly, through a distributor) and when I had an issue, I...

You should better use your time in helping questions to be responded with truth and not bullshiitt like Vmax does
writing about functions that we as users do not have access. Arguing with...

Wakeup Vmax ! I have got the Loadfile information trough YOUR mouth ! Your are the one who did post it here at the forum remember ?
Now you advise me not to use it ! you must be...

IF it means you selling Mach3 then sell Mach3 (;-) not really a problem.

(;-) TP[/QUOTE]


Hi Vmax, do you work for UCcnc ? How can I get in contact with this company directly, I wrote 2...

Ok so far there must be an initialization error ....
I did this
If you open UCCNC and you call this macro (m2800 f.example) ...