Hey guys i bought a 15s at an auction that was susposed to only have a error code and it turns out they were really dishonest and its missing parts.
Can someone take me a pic of the inside of the...
Type: Posts; User: mr.andaya
Hey guys i bought a 15s at an auction that was susposed to only have a error code and it turns out they were really dishonest and its missing parts.
Can someone take me a pic of the inside of the...
RR2P-U-AC120 - Idec - Relay, DPDT, 10A, 120VAC
This is the relay that came with my kbmm
http://cnc4pc.com/Tech_Docs/C6R6%20and%20KB120%20V1.pdf
Is how I hooked it up
I have a retro fitted g0704, Ive installed a 1.5hp treadmill motor, C10 bob, kbmm-125, c6. After a few issues I have got it "running" first problem, when I stop the spindle(m05) the relay on the c6...
I just want to thank everyone for the help, last night I finished my nema34 z axis mount using the 2 axis's(manual Z) and will be finishing the conversion this week.
Thanks again guys
-joe
Ina do the power drawbar with the tooling forsure.
Yea I've been looking at his site for the past few weeks, I'm like treadmill motor, 4th axis, 5th axis..... I want it all.... Lol
Cool thanks, It seems fast with the machine not bolted down lol. My gibs arnt super tight but "snug" I figure I'll be adjusting and re adjusting soon. I wanted to Cnc it while manual oiling it, then...
@fastest1 hey I ran ur settings, wow haulin ass lol. My gibs are a little tight(brand new) so the motors miss a few steps. I turn it back down slower, what do you run on ur dip switches?
Thanks...
Gotcha, I'll work I it when my wife gets back. I'll post my results. How fast are your rapids with it set like that?
Thanks
-joe
Chai's ball screws, I don't know what you mean by microsteping my pulse/rev is 400
Edit, what do you recomend I should set it to?
Thank you guys! Now I have to get it all togather and tune the motors.
Any one have a base line for nema23 570oz motors with 5056d's?
Again thanks guys
-joe
And we have motion!! I also changed the dips to on on on off off on on on as per a thread I read.
Ok guys I did a little testing, parallel port is reading 3.5 volts at pin 9 like it should. Cable is reading the same all the way..... Bob is showing 5v at 9 when jogged.... So now it looks like the...
I made a mistake on the computer type it is a hp pavilion 500
The dro is moving, I have the y and z disabled in ports n pin, I also have the ratio set to pin 0 on both sections, I will test the cable when my daughter takes a nap.
Should I try to wire it like...
I am using the arrow keys. x is left right, y is up down, z is pg up pg down
The c10 has 5v and the en line is jumpered for testing, j have tried to change the jumper to 5v@com and same thing but i will try it again. I got the cable from a electronics store, it says 1:1 on...
i am using mach3, i have the port set to 0378 and im using the 8com9 pins on the bob and its also set to 8(stp)-9(dir) on the ports n pins page.
ati's wiring wants the jumpers to be set to gnd, cnc4pc's wants 5v.
http://cnc4pc.com/Tech_Docs/1_C10R10.PDF ...
Hey guys, I signed up for this site awhile ago lurking around here and there. I've been wanting a Cnc mill for a long time so I purchased a g0704 because of the popularity, support and "easy"...