Search:

Had problems with ATC and Carousel. Carousel would not park in correct spot to drop pot, and ATC would get hung up midcycle. ATC now works will change tools and move tools in and out of carousel. ...

Had to re zero the carousel, it was stopping between pots. Reset 0 on the servo, it works fine now. But now can not run a program. Push cycle start and get Operator Message EX524 COMMNAD S-Function...

The EX218 problem was fixed, it appears that the tool magazine did not know where home was. I called Gosiger Mid-Atlantic and they walked me through resetting the ARS15 and viola the magazine would...

Okuma Millac 415V Mill., One problem fixed only to have a new one. The magazine works fine now will rotate in CW or CCW. Not the tool changer arm is stuck under the spindle. It seems that Z zero...

Just picked up an Okuma 415 mill and inherited some problems. ATC wont move. EX218 code cant reset. The double arm seems to be in the correct position. Z is home. When I push the CW or CCW button...

Not much experience with the KL8070D. I have the steps set to default on the driver. Had it on 2000 but does not make a difference.

This seems like a common theme. I am also having the same problem. I am using the USB smooth Stepper with the C25 board and KL 8070D driver. I have home switches working, Estop working but motors...

Hello Fadal Error, trying to get AhHa up and running. finding out that it does not like some G Code. When I make a drawing and turn it into G Code I can select the type of Machine Definition so the...

I have a similar problem. I start up the machine, run through the homing cycle. If I call up a program, cant get it to run. I hit the start cycle and nothing. If I try and do a canned cycle, wont...

Hello All,

I found what I was looking for and revamped a photo. 252522

Does anyone have a picture of the magnetic overlay for the Heidenhain TNC 151? I would like to see one to determine if it is worth fabing one.

Thanks Gus. I figured each machine has its own parameters due to limit switch dogs. Pulses etc. I will use the numbers as a ballpark and tweak from there.

Thanks Gus, I am not sure what I did to the Z axis. I was only working what I believed to be in the X and Y. I can run the X and Y axis to the mechanical stops + and -. At the moment the spindle is...

Still having Soft limit problem. I have the actual Z at 0 but refunds says 440 . How do I tell the system were 0 home is .

Thanks machinetec, I downloaded the parameters and will figure out the softlimits. Not sure what you mean about the pulse marker.

I can move all the axis now but have a soft limit problem.

Thanks for all your help. It turned out that the Red button on the controller had intermittent contact. Removed it cleaned it and put it back on . When I got back to the screen that I was stuck on,...

Thanks for the input, I will be back in the shop Tuesday night and give it a shot.
Mike B

Hello all you Bridgeport INTERACT MK2 users, We have an old Bridgeport INTERACT with the Heidanhain TNC 155 controller and there is no one left in the shop that has ever turned it on. I turned it...