Hi Peter
I use a Hitachi 11kw vfd on 240 single phase and use it to power q 7.5 Hp Colombo spindle. I did not have to make any special wiring other than to take each leg of the 240 and attach it to...
Type: Posts; User: MGHood
Hi Peter
I use a Hitachi 11kw vfd on 240 single phase and use it to power q 7.5 Hp Colombo spindle. I did not have to make any special wiring other than to take each leg of the 240 and attach it to...
You are welcome. My CNCRP clunks less with the servos than the steppers that I originally received with the machine. It seems odd that your issue is with Z and Y+A. I am wondering if your drive belts...
I run a CNCRP 48x96 and have a 5.5kw Colombo spindle and Clearpath servos and don't have any problems with the Z axis dropping down. The biggest thing someone notices is how quiet the spindle is...
I have used gecko 320's before on my previous machine and have run 3 switchers and 2 large toroid supplies. It's less trouble to run convential supplies and you won't have to worry about spikes when...
I forgot to mention that taking a stepper or servo an a bench and testing it doesn't do that much good. They will both violently jerk and need to be clamped to the workbench. Being your machine is...
I have an AVID CNCRP machine I have installed Clearpath Nema 34 servos and have found that if your motor tuning is off you will get violent jerking in the gantry. Try to adjust the acceleration...
Planet CNC will not run Mach 3 it only runs their software.
I just bought a Planet-cnc Mk3/4 card, lic, and Tng. 1. I can’t enter licensing info
I get an error "Error parsing license file (1)”
2. The software displays the card as
“PlanetCNC...