Search:

Hi,

In the shop I work at we have a Morbidelli Author 600 and Xilog 3. We have BobCAD CAM trial version which currently generates basic G-Code for Xilog Plus Morbidelli Type of machine. Now this...

Hello Forum,

Recently at the shop we went from an old computer which had install Xilog software. We backed up the software and all its parameters for it and bought a new computer for the...

Hi Forum,

At the work place as mention before in previous post, we have a Morbidelli 600k CNC machine we are trying to get it to work and cut wood. Currently I could size the X, Y and Z Axis,...

Hi,

Hello forum, after a day of work in the shop, I have been able to figure a few things out in the Morbidelli 600ks point to point router machine. Currently I am stuck in trying to run a program...

Hello everyone,

Julio here from Zion Tools Inc., recently I have been troubleshooting a Morbidelli Author 600 machine routing CNC Machinning Center. Today I was able to turn on the power, home the...

Hello everyone,

I have a Leblonde Makino FNC 74 VMC machine and been using it for a few months now. So far so good and very reliable, however recently my Machine did not detect the tools being...

Hello everyone,

Recently got hire by a machine shop where they have Yang MV-3A machine which I need to operate. Now everything was going well a few days ago, I could change the tool with ATC...

Hi Forums,

Doing a little of research and looking similar topics on CNC Zone web site I have found a soluction to the thermal alarm lamp problem. It seems that when the Machine Shop is very cool...

Hello Forum,

Hi, recently we have install a Leblond Makino FNC 74 and brought a few weeks ago a service representative of Makino to teach us a bit about the Makino VMC. After a few weeks after...

Dear Forum,

I know this might not be the correct place to put this particular post however I have not found the correct thread where this topic would go under. Here is the issue we are having at...

Dear Forum,

Was conducting a research on Wire EDM to find out if it is possible to bore holes on the material being work on with Wire EDM. I know about Small Hole EDM machines, however can we make...

Dear Forum,

Up to this point the machine still gives me the 420 and 423 messages of the wire being not threaded in, however I think the motor belt I think is moving too slow. When I help the wire...

Dear Forum,

I was able to take care of the 420 error by helping the wire of the transport belt when threading the wire in the lower nozzle, which solve the 420 error for me for the time being....

Dear Forums,

Today I ran some few diagnostic in the machine to see what is making the wire pull up every time i try to do the autothreading.

Diagnostic number one begin by removing the lower...

Quick question, can I get more information about the wire slipping here it says: "There are also 2 springs that activate the wire shear in the upper head, check and make sure that they are not...

At Gary,

Gary is it possible for you to capture a video or sent me to my email photos of the spark plugs? Do you still have the defective spark plugs with you so you can take pictures or a video...

Hello Forum,

Thank you very much Gary for your suggestions on checking the spark plugs in the machine. I have uploaded a new video of what is happening with my machine to see if anyone could...

Dear Forum,

Hello again forum, wanted to ask a programming question about the Wire EDM that we have in our machine shop the AgieCut 120, can I change this line of code in my programs:

SKIP STP...

Dear Forum

This is the link to the youtube video for the AgieCut 120 which is currently working.

Youtube: YouTube - ‪AgieCut 120 running and cutting!‬‏

However I...

Dear Forum,

This is an update to the wire edm machine AgieCut 120, in this update I am happy to inform our Wire EDM machine is up and running cutting aluminum metal type of mirror finish. The last...

Dear Forum,

This is an update to the current situation with the AgieCut 120. We have been able to fix a few problems with the WEDM such as the X Axis Switch was not working properly, and the M3...

Dear Forum,

I have been able to put the generator to work, however when I tried to run the first program it seems to me that it is trying to run by the machine does not move at all. It is still...

Dear Forum,

As promised this is the youtube video for the AgieCut 120 MMD if anyone can tell me if there is something wrong with the machine please help out. The Agiematic CF gives me one error...

Dear Forum,

Currently at our shop we recently bought an Agiecut 120 Wire EDM machine. We have set it up, we got the power flowing through the machine Agiecut 120, the computer and power supply...

Hello everyone,

Recently in our shop we have been able to repair our air compressor, buy the coolant, and balance the rest of the liquids require by the Takizawa TS-10 CNC Lathe. The machine still...

I think the machine is a 1994 and the controller Fanuc is from 1984 I still need to confirm. I have check the servo and rotation which is running the way it should be. AI_THE_MAN can you give me the...

Hello everyone,

My name is Julio Cruz, and currently in our Shop we recently bought a Takisawa TS-10 CNC Lathe. We have been able to hook up electricity to the machine. When I turn on the machine...

Hello!

I have a big problem with these two programs teksoft cad/cam systems 2d mill for windows, and the prototrak mx2e. The problem is when I finished drawing in cad system I transferred the...