Search:

The file download doesnt seem to have a f3d file in it.What are you using for the stock size when you do the setup in CAM? If its larger than the model then that would explain the offset.

EDIT:...

I think Tormach is happy where they are in the machine world. Hobbyist and startups, if they need to start competing with haas a lot would need to change and not just with the machine.

But hey you...

add this to your places to check
https://www.facebook.com/groups/101816237175821/?ref=group_header

I use a slightly modified cement mixer from lowes. Basically i just removed the metal augers and put some delrin blocks in their place. Need to do a fan upgrade to it next like you did for the 1100...

If you have a PDB Tighten it so that you have to pull a little to get the holder out when you release it.

Make sure your collet nuts are tightened down good. I actually run all my TAS roughers in...

When clamping down the work, check your parallels. If the works isnt being pushed down, and its being lifted up you will be able to move them up and down a little. You can tap it down with a mallet,...

put an indicator on the work when you are closing the vise jaws. I find that if using my soft jaws, the movable jaw has a bit of lift if I am trying to hold onto say 1/4" of material.

yup, I prefer to run without coolant too. Just as you said, slightly better finish and no mess from the coolant.

Well, finally got mine up and running this weekend.. And boy have I been missing out!

Fast, solid, quiet and a great finish. I have the 2.48" one running all 5 inserts. I feel like I am barely...

Yeah that looks like a good plan. Wish I had seen it before :)

Got this installed and running this weekend. Works great man, love it.

Do you know when the camera support is going to be added? (unless it is and I missed it)

If it was me, i'd start by deleting the app, then reinstalling it.

lol, she's 4, she can deal. You know you are a parent when your kid has a brand new ipad and you have an 6 year old one.

I could do my iphone, I have a SE.

For an iphone, if there was jogging...

I kept seeing this thread come up, and now with the last two posts I am going to HAVE to install it

I'll have to steal my daughters ipad, since I only have an ipad2 which cant get ios 10+ :(
...

Is that were the lead in happens? I try and enter/exit from the corner to stop that, I believe on lead in the cutter gets pulled into the work piece a little more on deeper profiles.

awesome thanks guys!

How do we find you of FB :)

I think steve focused in on the tap, not the thread mill.

I have a few single points that I can get most threads with, and only a few multi-point. It really hurts the wallet when you break on of...

It depends on the desired end result. I often do a tumbled finish, which holds up decent. Like 74Burke I'll bead blast but only if I am anodizing, it will show scratches easily. I also like to use a...

Saw this on IG, figured some guys on here might take advantage. Looks like all are 50% off (no TTS stuff though) Come with 5 extra screws per flute and looks like the inserts too?!?
...

Just an FYI for future searches, the shank does easily come off. Remove the SHCS bolt in the shank and loosen the 4-2mm set screws

https://i.imgur.com/7W4Q0rw.jpg
...

it wont be a problem at all. I've tapped up to 5/16-18 with a form tap and never had an issue (im sure you can go larger too)

The tool offsets in HSM / Fusion are just for collision detection. The output setup sheets should give you a Z-min (no matter what length you have set in the table) to make sure you have the correct...

https://www.tormach.com/tormach-product-documents.html?doc_prod_name=PCNC+1100&doc_cat_name=Drawings

There are drawings in there. 81 3/4" max height

form taps :)

+1 for form taps, even more so if you are having to tap a lot of holes in one run

This isnt rigid tapping FYI.

That said there are a couple things to check. Once you get everything figured out, its pretty repeatable.

First, if you slow your chamfer op speed way down, and add...

My maritool face mill came with a bolt. Fits great.

Maybe they forgot yours?

Just need to cut this shank down a bit.

Got mine yesterday too. inserts came today, but it looks like the TTS collars are on backorder :(

I really liked how maritool included the screwdriver and bit, as well as how the receipt came in...

Yes, you need to upgrade to PP2.0 for future updates. They are on 2.0.1 now

https://www.tormach.com/pathpilot-updates-and-notes.html