Hi
I solved the problem. Install frequent regulator and change the speed from 50Hz to 30Hz. Now the turret work slower but without any noise.
Type: Posts; User: tano
Hi
I solved the problem. Install frequent regulator and change the speed from 50Hz to 30Hz. Now the turret work slower but without any noise.
The Fanuc is FS10TF
The turret is mechanical powered by small motor 0.4kw
Hi guys
Can somehow slow down the rotation speed of my turret in parameters?
HI cncmaker. Thx for reply. How can I find which type of turret is. And if the type of turret is sequence is there any option to make it random?
Hi guys
I have bought second Mori Seiki Al2 and realized that first one makes indexing of the turret directly from one to another position.(if the turret is on 1st position and want to go on 5th the...
Hi guys
On my Mori Seiki Al2 every morning when i start the machine the X-axis start to oscillating in stand by mode.
Like can't hold the position for about 10-15 min .After that time i can't see...
Hello Guys
I bought an old Schaublin 32 cnc milling machine with Sinumerik 3M control.The machine was under power for a long time and the battery was dead.I change the battery, reset the PLC and...
Thanks for info i will check the book this morning and see what can i do
Hi guys
I have Mori seiki AL2 lathe with Fanuc 10T control and my issue is when i start the machine in the morning in first one hour 2-3 times alarm LED ER1 occur on the panel.
Machine stop...
Hi guys
I have Mori seiki AL2 lathe with Fanuc 10T control and my issue is when i start the machine in the morning in first one hour 2-3 times alarm LED ER1 occur on the panel.
Machine stop...
On my machine there is rotating crank which need to be rotate 90 degrees and than pull out the setter arm.The arm is located near the chuck :-)
Hello Guys
I need someone who have this macros to share it.I found on Siemens site letters programing guide but there isn't macros
I need to engrave 200 six number different numbers and there...
Hi Guys
Does someone have newer version of software or knows someone who has.
My is from 1986 and i need from 1988,89,90. and also the procedure for that.
Many thanks
Hi Guys
I haven't find this procedure on this forum.If someone knows step by step reloading parameters for this control it will be nice.
Also how can i view the parameters and check the...
The version software is 4B and i upgrade successfully to 128kb.I need to install one more card in the soccets and two other RAM cards.
That is for Sinumerik 810. Do you have success on Sinumerik 3M ?
Hi Guys
I have an old machine with Sinumerik 3M control.Everything on machine is good except the small memory.
I have 32kb and i have information that can be upgrade to max 128kb.
If someone...
Hi Guys
After reinstall LADDER,PARAMETERS,TIMERS etc everything on machine works fine:
-Moving axis
-Homing axis
-Go thru menu EDIT,MDI,AUTO etc
The machine is HiCell 23s with Lambda 10L...
I solve this.
Thanks for the help guys :-) .
Now i need Ladder because i have lost all data.
Machine was power off for a long time.
Machine is Hitachi Seiki HiCell23-s.
PC soft...
Hi Guys
I have this situation on the screen does anyone knows what i need to do.
In the Machine Control tab set "Machine Limits" to "'No limits'. However, if your vmid file and MachSim truly reflect the kinematics and axis limits of your machine you may find that the machine...
Hello Guys
I have problem when i want to generate 5axis G-code alarm occurs see on the picture below.
The machine is DMU 50evo.
This happened only when i want to generate 5axis simultaneous...
Hello guys
I have Hitachi Seiki HiCell23s 4axis Lathe with live tools and have lost parameters.
The machine has encoder problem and stay without power about 8 months and now have this problem.
I...
I have similar problem.
I need post processor for DMU 50v with Heidenhain Millplus control
If someone have,please send me: [email protected]
Hello Guys
I have SPINNER VC810 with Fanuc 21iMB control probably because i don't saw this anywhere,just in the books what i get with the machine.
On the main panel is writing only FANUC.When i...
Hi Bill
I use with sequence number, not without sequence number
I just want to share information about what was the problem.
The DGN345(timer for clamping) was set to 200ms and i change to 1000ms.That's it
This i ATC macro from Miyano TSV21 with Fanuc OM control.You can change program No.9003 to 9000 and will not have problem
O9003
G04
G65H81P800Q#1000R1
G65H81P800Q#1004R1
G91G28Z0M19
G49
...
DGN are
380 - 0
385 - 0
390 - 0
395 - 0
400 - 0
and on other machine who is working are
380 - 10000
385 - 10000
390 - 2000
You are asking about PMC or DGN parameters?