523,753 active members*
2,334 visitors online*
Register for free
Login

Search:

Type: Posts; User: Moriduri

Search: Search took 0.00 seconds.

  1. Replies
    0
    Views
    349

    OMRON R88D-UA08V AC servo drive

    Hi, is the OMRON R88D-UA08V AC servo drive suitable for driving a Leadshine's 57BL180D brushless DC servo motor?
    I'm asking because some time ago I bought a servo kit including the ACS806 AC servo...
  2. Re: Leadshine technical support available on CNCzone.com

    Hi, have you solved this issue? I have an ACS806 and 57BL180D servo from Leadshine that suffer from a similar problem, the servo works below 530 rpm (the following error is high but it keeps...
  3. Re: Is it possible to disable 'Position following error protection' on a ES-D1008 dri

    Hi, have you solved this issue? I have an ACS806 and 57BL180D servo from Leadshine that suffer from the same problem...
    Thanks, Matteo.
  4. Re: Position following error on ACS806 + 57BL180D-1000 servo kit

    UP

    Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
  5. Position following error on ACS806 + 57BL180D-1000 servo kit

    Hello, some time ago I've bought an ACS806 servo drive and a 57BL180D-1000 servo from a chinese seller on Ebay, now I'm desperately trying to tune it using Leadshine's software "ProTuner" without any...
  6. Replies
    5
    Views
    1,617

    Re: Servo as spindle for mini lathe

    Any ideas on how to implement those funtions in HAL?

    Matteo.

    Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
  7. Replies
    5
    Views
    1,617

    Re: Servo as spindle for mini lathe

    I can lower the PPR even more if needed (4000 default divided by 255 max), stepgen limits and therefore lower RPM max isn't that big of a problem cause for now i'm just interested in know how to make...
  8. Replies
    5
    Views
    1,617

    Re: Servo as spindle for mini lathe

    Setting the encoder's PPR to around 400 wouldn't allow the parport to handle it? I'd prefer to avoid extra cards if possible.

    Matteo.

    Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
  9. Replies
    5
    Views
    1,617

    Servo as spindle for mini lathe

    Hello, I'm currently retrofitting an old mini lathe to CNC using LinuxCNC as controller.
    My goal is to understand how to setup a servo motor as a spindle and how to synchronize it with the Z...
  10. Re: Cheapiest solution for CNC aluminum spindle...

    Nice!!! Thank you! ;)
  11. Re: Cheapiest solution for CNC aluminum spindle...

    Thanks for the suggestion Randy! :)
  12. Cheapiest solution for CNC aluminum spindle...

    Hi, I'm new on this forum, I'm searching a spindle to mill aluminum on my homemade CNC (I'm designing it, actually..).
    My budget is very very restricted (50€), so what could I use?
    I saw on Ebay...
  13. Replies
    8,388
    Views
    34,807

    Sticky: Re: Welcome thread-tell us about you.

    Hi, I'm Matteo, a Computer Science student from Italy, I'm interested in CNC, mechatronics, electronics, computer science and so on.. :)
    See you!
Results 1 to 13 of 13