I am trying to repurpose four Granite Devices Fluxeon VSD-A drives for use with AC servos.
I would like to tune the drives with GDTools software version 2.0.1.
I have been able to connect the...
Type: Posts; User: Exhibitology
I am trying to repurpose four Granite Devices Fluxeon VSD-A drives for use with AC servos.
I would like to tune the drives with GDTools software version 2.0.1.
I have been able to connect the...
Greetings,
We’ve set up a Multicam CNC router with a CS-Labs
CSMIO-IPS motion controller using Mach3.
It is a completely successful upgrade with one
exception—X axis will not home.
Z axis...
You nailed it.
It is a Granite Devices VSD-A.
Excellent.
Thank You.
Rich
293940
I'm in the process of rewiring his control box. I'll send photos when it's presentable.
Thanks
Rich
They were connected to DC brushed servos. They also lack labels but their form factor closely matches DC brushed servos sold by Keling. Based on the condition of the wasteboard, the machine was...
It truly is a mystery.
Thanks
Best Regards
Thanks for your interest.
This is it.
Rich
293868
I inherited a DIY machine running Mach3 with DC servos.
I got only hardware so I have to re-configure the software.
It came with servo drives I've never seen before.
The system builder is...
Thanks for your help.
I'm away on vacation but I'll try it as soon as I'm back.
Best
Rich
As to the fair market value of a Multicam MG 207: Last year I bought a 2008 Flexicam Stealth 1540 for $36,500. It has a 5'x12' table and an ATC. It came with two 10 hp vacuum pumps.
$36,500...
I'll take a look at that tomorrow.
I've read many of your posts.
Thanks for your generosity.
Rich
Send me your email address and I'll forward the quote we got from Laguna last year.
Rich
The value of the machine all depends on the routers features. Spindle HP? ATC? Tool holders included. Stepper or servo motors. Condition of the bearings and ball screws.
I just bought a 2002...
I just acquired my first Multicam. Its a MG204. I'm slowly learning my way around the machine. What has me stumped is using multiple tools. I put an HSD cat30 10hp spindle on the carriage. I had...
Sorry I've not responded sooner. Thanks for posting those pictures. I finally had a chance last weekend to try wiring up another VFD without modbus. Unfortunately, I couldn't get it to go. There are...
That's good news. Could I ask if you could post a couple cell phone pictures of the connections. The one at the inverter and the one at the M24 board. Thanks a bunch. Best Regards. Rich
Thanks for your response. I haven't had a chance to power it up again to test it. I can live with with a pot. I've got one already but it's not too speedy.
Greetings,
I just picked up a used Multicam MG204 with a 4 hp Colombo spindle.
I want to replace it with a spare 10 hp HSD and Yaskawa VFD.
Unfortunately, the Yaskawa model does not do...
Thanks for the quick reply.
I think I'll forgo buying a machine with 20 year old computing power. I have a fondness for cast iron but . . . We have four cnc routers. All are relatively up to date...
I saw your post regarding sending a drip feed to a R2G4. I'm considering purchasing one and would like to know whether you ever had any success.
Best Regards
Richard Rew
Exhibitology