Good luck with your build!
I have built the 25 x 37 Dual Leadscrew Machine from Solsylva. The plans were great!
I would like to build the 24 x 48 Rack and Pinion, to get the cutting speed up. My...
Type: Posts; User: pipertom
Good luck with your build!
I have built the 25 x 37 Dual Leadscrew Machine from Solsylva. The plans were great!
I would like to build the 24 x 48 Rack and Pinion, to get the cutting speed up. My...
My concern would be Human performance at -4 .
My shop gets down to about 40. And I thought that was cold.
How do work in that temp?
Cheers,
Tom
Great Job!, You will enjoy the using machine!
Cheers!
Tom
Looks good!
It's a lot of fun just building the darn things let alone running them.
I'm thinking about building Solsylva's new 24 x 48 Rack and Pinion Machine.
Enjoy the build!
Tom
For what it's worth,
There is a good article on building simple dampers on David Steele's website:
http://solsylva.com/cnc/dampers.shtml
I made the ones using the 2 1/2" casters for my CNC...
Chad,
Thanks , Thats a great help. saves me a lot of researching. I had gone to Gardner where I found 1/8 collets that fit. But they don't carry the bearings.
Thanks again,
Tom
flyboy1015
Did you find the bearings for your Bosch Colt?
Mine just cra**ed out last night. I would be interested in repairing this one rather than buying another new one. Although I would try a...
That's a pretty cool Laser!
Definitely on my list of things to do!
Thanks for the video
On my CNC router I can run X at 50, I can only get Y to 40 & Z to 35. But I keep them all at 35 for more reliability.
Jeremy
So far I like it fine. Seems to have enough power.
I used the plumbers strap recommended in the plans. However after testing I added a second strap a little lower to keep the router from...
Yes it is a workmate. Surprisingly the table doesn't bounce at all.
I do plan on building a dedicated bench for it though. (another future project!)
The whole machine is as per David Steele's plans with no intentional deviations.
Ok, I finally finished! :banana:
I did a quick tuning, the x runs at 20, the y & z run at 30. (I'll have to work on the x some more)
I loaded the sample Pub sign from Vcarve, and let err rip!...
Your machines are all great looking! -- Wow!
I have just mounted the Y gantry. I'll have to dig up a camera and send some pics. It seems to take forever when you can only spend 3-4 hours a week...
kosymailman;
Your machine really looks good!
I am just finishing the z-axis on mine. I have not had enough time to work on it like I would like to.
It's a good thing you gave up the laptop. I...
I am currently building the Sosylva CNC router. I am about 30% done.
Cheers
PiperTom
I go to the DIY-CNC Router Table Machines.
I am currently building my own and need all the help I can get!
Cheers
PiperTom
I have ema 23's on both my Taig mill and Sherline lathe. I plan on using 23's on a CNC router I am building.
Cheers
PiperTom
I currently have a Taig 2019CR mill, and a Sherline lathe w/ 17" bed, both CNC.
I also am building a CNC router.
Cheers
PiperTom
I have the Taig 2019CR mill, and Sherline Lathe with 17" bed. both with CNC.
Cheers
PiperTom
Hi Guys,
I've been lurking on this site for a couple of weeks now. All of you have inspired me to try building one of Sosylva’s CNC routers. I ordered the plans on Weds 8/2 and I'm looking forward...