Search:

What is the correct parameter?

Is parameter 52 on a fanuc ot control the right parameter for changing how fast the handwheel comes out when in auto.If so what number do i put in for if to move in .001 instead of .0001?

Ran good all day no alarms

I have know idea where they would be located at.Would they be in the cabinet with the control or where the feeds are at.Its a Lucas 5 inch boring mill.

We got it going but it still comes up with the 930 cpu interrupt alarm.It didn't come on for about 4 hours after he had it up yesterday.Will run it today and see how long it will stay up.The fanuc...

thought about that last night and will tell the fanuc guy monday about the stroke setting.The machine we got the parameters from has a bigger x axis.still don't know why it keeps getting the 930...

the x will not zero out so that you can set it.so it doesn't know where it is at.

We have a 5 inch lucas horizontal boring mill with a dynapath delta 20 control.we are having a problem with it locating.It is a point to point machine.The way it was set up was you type in the number...

We had fanuc come out today he worked all day on it got it going except for the x axis would not home out.Then at about 1:30 this afternoon we where at the machine and the screen just all of a sudden...

AMERICAN LATHE COMPANY UNITURN 3220WX120 MACHINE SERIAL NUMBER IS 80138-78. FANUC MAINBOARD NUMBER IS SERIAL NUMBER 3200008994.THE PERSON WHO RETROFITTEF THE MACHINE WAS ...

HAD TO WIPE MEMORY DUE TO A 930 CPU INTERRUPT ALARM.DIDN'T HAVE ALL THE CORRECT PARAMETERS FOR THE MACHINE BECAUSE THE COMPANY THAT RETROFITTED IT IS OUT OF BUSINESS.IT IS AN AMERICAN LATHE 3220 WITH...

We have a 5 inch lucas horizontal boring mill with a dynapath delta 20 control.we are having a problem with it locating.It is a point to point machine.The way it was set up was you type in the number...

Its the part that is under size we are working on replacing or rebuilding the ballscrew.

I HAVE A PROBLEM THE BALLSCREW IN OUR LATHE IS BAD WHICH WE ARE FIXING.THE BALLSCREW HAD GONE OUT AND IT JUMPED .0015 AFTER TURNING IT .0001 ON THE HAND WHEEL.THE PART WE CUT IN IT IS .0014 SMALL IN...

we have a sony glass scale sr-801 on our lucas machine.when you start it up and hit the x axis button it starts counting up until it hits 999999 then it stops.i think it needs to be clean or the...