Search:

Have you tried multicam Canada. I had a 5x10 plasma with a hypertherm 125 that I got brand new (used) in a box for around 30k.
It is a simple machine (and simple to operate) but I cut 1.25" hrms...

Gauge blocks are usually the stoppers for the sheet metal. Located on the end of the table and near the clamps. White button under the e-stop on the end of your table should be the gauge block...

Problem solved. Thanks.

Hi. I have a new problem. Since trying to swap lens from 5" to 7.5" (and back) I have not been able to
center the lens/nozzle. The beam appears to be centered but because the hole it makes at 50...

Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
somewhat stumped on what I am assuming should be a simple fix.
My problem involves a used cinci...

Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
somewhat stumped on what I am assuming should be a simple fix.
My problem involves a used cinci...

Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
somewhat stumped on what I am assuming should be a simple fix.
My problem involves a used cinci...