This is the information in the Fagor Manual
"Connector X3 - RS232
It is a 9-pin SUB-D type male connector to connect the RS 232 C serial port. The cable shield must be connected to the metallic...
Type: Posts; User: cnc321
This is the information in the Fagor Manual
"Connector X3 - RS232
It is a 9-pin SUB-D type male connector to connect the RS 232 C serial port. The cable shield must be connected to the metallic...
We recently retrofitted a Mazak lathe and removed the Meldas YL and axis drives. The Meldas was working, just old and tired. Before I haul the old CNC to the curb, is anyone interested in some or...
On Maho's that we have retrofitted, the terminals were L!, L2, L3, N, PE; but nothing was connected to the N terminal. (it was expected that the N and PE [earth ground] were connected together at...
These connections will work for most machines. Actually the TXD, RXD, RTS, CTS and GND are the critical ones. You can jumper DCR, DSR and DCD at both ends.
Do you mean PIC or PAR? The PIC is the "ladder" or "PLC" program that was written by the machine OEM (or DynaPath for them). The PAR is the machine parameter table that defines the CNC/machine...