Problem SOLVED ;-)
The PLCI was in STOP mode.
Type: Posts; User: Rafal-P
Problem SOLVED ;-)
The PLCI was in STOP mode.
Hello,
Does anyone know how to check the status of inputs I42 - I104 and outputs O25 - 064?
These are the I / O between PLC and CNC.
434963
Best regards
Rafal
Hi Carlos
Do you know how to check it?
Best regards
Rafal
The CNC 800 TG-I has an I / O1 - 37 Pin and I / O2 - 37 and I / O3 input card installed.
The documentation shows that the EMERGENCY input is I1.
In my case, I1 = 1.
This is how it looks in the...
Iceland
Hello,
Unfortunately, the problem is still not resolved.
It looks like the problem is not hardware. I hope I'm wrong.
best regards
Rafal
Hello,
Unfortunately, the problem is still not resolved.
It looks like the problem is not hardware. I hope I'm wrong ;-)
best regards
Rafal
Hello,
I have a problem with Fagor 800 TG-I like this
400635
The monitor displays Error 064.
I checked the physical inputs and then displayed the IO status:
I1 - Emergency Stop =1
I2 -...