G28 h0 did the trick. [emoji106]
Sendt fra min ANE-LX1 med Tapatalk
Type: Posts; User: Prayer
G28 h0 did the trick. [emoji106]
Sendt fra min ANE-LX1 med Tapatalk
Im sorry, did't read your question to end. Assumed it was a lathe.
Have you read this http://www.helmancnc.com/fanuc-g76-fine-boring-cycle-cnc-mill/
Dont know if it can be any help.
Gl
Maybe it can be changed in parameter 3706 If you change bit #5 (ORM). The value can be 0 or 1.
But what do you gain from having it going M3 instead?
Im not familyar with your barfeeder, but i have this https://www.scribd.com/document/403455696/DH-65-65L-S2-Instruction-manual-eng-v04-2-2017-11-20-pdf
On my model I control the retract-point on...
Is it going out of the Spindel, but don't get fully retracted before the Spindel starts?
Before activating c (m90) run m19 (Spindel orientation) . Also remember to rewind the c-axis to zero before deactivating c (m91).
If you dont rewind, zero will change next time you activate c.
Are you running feed/min or /rev.
On my lathe it's g98/g99
Think mills use g94/g95
He guys.
I'm wounding if it is possible to get my machine to reset c-axes cordinat when disengaging it.
Today I have to rewind it to zero before disengage which can be quite time consuming.
It's...
Maybe you should try g80 after drilling cycle. But not sure, not much of a okuma-guy
I found this in my manual, but dont know anything about where the bx25* files are stored, or how to change them.
451418
Do you have a key lock on the control you have turned by accident?
Is it the color scheme you would like to change?
Sendt fra min ANE-LX1 med Tapatalk
I have a 18i from 2006 and the point I go to before calling the g71 is the startpoint of the cycle. After g71 I rappid to start contoured and go g1 to the end of the contour....
Maybe same problem as in this link.
https://www.cnczone.com/forums/fanuc/160139-cnc.html
Sendt fra min ANE-LX1 med Tapatalk
Hi. I have a Question about manual guide.
When the curser is on a m-code the control sometimes shows what the code does. Example "m8 = floodcoolant on."
Is it possible to edit and add to this help...
Hi ppl.
:wave:
My machine have a max feedrate of 30m/min but when i use "Toolcall xx" the feed to the changing position Is only 10m/min. My fix on till today is an extra line before toolcall,...
anyone?
Hi guys, ( And sorry for my bad english )
I have got a new Lathe at work, with fanuc 18i control. And most of the time it pretty much does what it's ordret 2 do :) But when im facing, or making a...
I would also like to get iTnc530 post for edgecam R1. please send to me [email protected]