I'm selecting the bottom face of a pocket. Choosing to rough with a 1/2" EM. Now, I need to go back with a 1/4" EM to clean up the corners, and where webs still exist between areas to small for the...
Type: Posts; User: dewme5
I'm selecting the bottom face of a pocket. Choosing to rough with a 1/2" EM. Now, I need to go back with a 1/4" EM to clean up the corners, and where webs still exist between areas to small for the...
OneCNC is what I use everyday for drip feed operations. It's free, and works great.
CAD CAM CNC software solutions by OneCNC CAD/CAM
Pro/NC has a post processor editor included. Open your post, find those things that need changed, and change them. Save as a new name, so you can revert to the old processor if necessary.
Possibly a Morse Taper. But, you would have to find out for sure. Find a compatible system, and you are ready to go.
I do not know how your Jacobs chuck is attached.
http://www.cnccookbook.com/CCGWizard.html has a pretty good calculator for feeds and speeds. you can also look up SFM (surface feet per minute) for lots of materials on various websites. The end...
I believe F5 key will turn on the spindle.
skipping forward when using absolute mode. Just start a few lines before where you need to be. I usually find a spot prior to the last Z retract. ...
using inch measurements.
I'd start at 10,000 or 15,000 RPM. Move about 6 inches per minute, taking cut depths of about .005" Step over would be half the distance of the end mill.
Run a short...
That's a gantry style machine.
Careful on "the machine thought it went back up" That machine is just doing what you told it. With a new machine, and learning, it's always a good idea to do a dry...
I'll have to disagree with #2. Acrylic has a great tendency to channel the beam in a straight fashion. Adjust the focus correctly, and you can cut the acrylic with nice straight sides.
The...
There are many places you can get your plastics from, and save alot of money over what they would charge. If you are producing these things, in any volume, you should not buy your materials from the...
I'm making the assumption that the burr you are referring to, is on the side of the cut, and not the dross below the cut.
The size of that burr, is just a factor of your cut conditions. If you...
Originally Posted by 307startup View Post
Guess what, sunshine? There are no guarantees in life. You get what you get when you deal with other people. You think you are alone???
Change...
Looking for a sales rep, not an employee. Commission work.
I have an Amada Laser that is not staying busy enough. I would like to find someone who can acquire good customers.
PM here, or call...
With the part selected, right click, and choose array. From that menu, you can choose the amount of columns and rows of your part you want, along with spacing.
Please forward the drawing so I can quote. travis @ wattslaser .com
Look into sheetcam as well. There is a linux version, and the trial will output 180 lines of code.
Fanuc 0L please
I do not need rotary style indexing. My laser works in a 50" x 50" area, and can reposition. This reposition, or indexing, allows use of standard material sheets of 48" x 96".
There are...
it looks promising, but I don't think it supports indexing. Something I need, maybe I can find a work around. Other then that, it's just what I was looking for. Thanks.
I've done a little searching, but I can't seem to find anything. Jetcam is one of the CAD/CAM nesting softwares out there. Available programs to use under windows, seem to be in the $5000 to $10000...
What is your time frame, I have a laser.
I have a W&S #4 model 1420 turret lathe, that I need to get a cross slide nut (7/8" double threaded).
No, I'm looking for a PDF of the manual or something like that.
I've bought an Amada 655 Laser system, and could use info regarding the 0L controls. Anybody willing to share?
These are off of small notes on sample pieces. Should be self explanatory, but I'm not going to translate. (I'm going to assume metric settings
0.250" steel(crs?)
S=1500w
t=30hz
b=20%
f=200...
What is the wattage of your laser? I've just picked up an Amada 655 1500w, and there are several sample pieces that came with it. should be good for a start. I'll get back with those once I get...
You can find a good amount of tutorials just by searching the net.
Leo Greene's site has some more advanced tutorials, but his explanations are really good. ...
Just a way out guess here, but it sounds like something might not be 100% right with your parallel port. A expansion parallel port is not expensive to test this. The parallel ports on the...
have you downloaded EMC yet? you can run it right off of the disk without installing to the hard drive, so feel free to give it a try. If you've become used to Mach3, it's probably best to shell...