Search:

I am new to multi spindle and multi turret Okumas.

Problem is timing with p-codes i dont understand and this alarm
2463 Change timing G140/G141/G142

What i want to do is face and turn both...

I went ahead and bought and Love it. it is as easy to engrave on all my mills as it is the Haas.
Shannon

I got to try the demo today and love it. great litte program will be purchaseing. are the owners of it on here

I can actually use the rotory on either side. I have one left and one right. I am going to use the right rotory. It is a disgrace to the Mazak but I have a HAAS 5c indexer mounted to a plate on the...

Pic didnt load last post

I changed the Z depths. Still getting som crazy feeds . Do the Axis look correct for standard rotory setup? thanks

ooohhhh. I new that it needed that but did not know where to tell it. Thanks a million.

I didnt have the inverse time feed checked but tried both ways

Here is the pic. I can do this very simple on my haas but machine time I have to use my Mazak. If I can get it working we can purchase the full version

I just found this software looking for a way to do rotory engrave on a Mazak vtc 200 c. I downloaded the trial but can not get good results. I am gettin A moves over 360 degrees. any help

the machine has testra controls running HPGL. I am attaching my post i wrote so far and a copy of the output i want if someone could look over it for me. Thanks

Here is an update. I got the machine running today. It is suppose to have a fagor 8055 control. There is no monitor on the control cabinet only a jog handle with a two line display. I am still...

I also need a source to buy a couple replacement plastic forks for the atc tool holder. only have 9 of the 12 spots to put tools.
Thanks for any help

I am not sure. where will I look? It is hooked up to a desktop pc. the servo drivers have sst on them so far that is all I have found. i am attaching a link to a pic of the machine maybe that can...

I need help with getting a friend up and running. he bought a "GMR phantom" CNC router 60"x120" with 12 tool changer. If any one is familliar with this machine I need a post for Aspire. I use Surfcam...

I need help with getting a friend up and running. he has bought a "GMR phantom" CNC router 60"x120" with 12 tool changer. If any one is familliar with this machine I need a post for Aspire. I use...

I need help with getting a friend up and running. he has bought a "GMR phantom" CNC router 60"x120" with 12 tool changer. If any one is familliar with this machine I need a post for Aspire. I use...

on the test without change Z offset I will have to move the n2. I only want to face the first part off the slug. then after that the cutoff is my face. yes it is to break the part off i dont want an...

thanks I am going to try it soon as I get done helping one of the guys clean out our vtc 200c "time to change coolant". I use the if and goto statement on our OKUMA's when using the bar feeder and...

is there any way you could attach a pic or file or somthing so we could see the program. may just be a simple typo that is over looked

sounds like the tool geomotry is not correct I have done it many times with old t2 and 640. use taper never changed the tpc data or paramaters. could also be the min MATL. DIA.

Yes. I want to shift .279 for each part so there is 13 shifts. then reset back to the original Z zero for a new slug. I know I could use MAZATROL to do this and get the first and second side and all...

MAZAK QT Nexus 250 with pc fusion 640t EIA program.
I feel stupid that I can not get it to work so i hope someone can help. I am cutting 13 pcs off a slug. The program is structured with a face skim...

I like TITAN "Tuff Karb" #TC62832 is a .500 inch 3 flute super sharp endmill for allum.

I have done alot of it on a lathe but not much on mill. The closest I have on a mill was alloy 75 the best thing I found to use was surfcam trumill i can run at tail pucker speed and feeds. I would...

we have a little mini lathe. we made some parts onetime around .100 od with
.062 thru hole. had same problem of losing parts. we just used a straightend paper clip fixed to the cutoff tool post....

We got rid of trimsol years ago it would go rancid on us in no time. we then went to blaser swiss lube for a few years. we tried valcool and ended up using wallover now. we drain and clean coolant...

Does anyone have a maint. manual for a Hitachi Seiki model 2ML horizontal knee mill 1970's model. If so I could pay a fair price for it or a copy

yes it was a haas tech. he could not get the factory disk to read. He had got everything for machine but was having problems with the rotory paramaters. but finally got me up and running thanks for...

Monday morning before I got to work the battery was taken out without the pigtail battery and everything lost. Servise guy here now charging me 135 per hour and doesnt have the parameters for the...