Hey for those of you interested in some Bridgeport Ezpathe Lathe parts I have them for sale. What is included is everything in the control box, all but the relays in the bottom I need those.
Type: Posts; User: Bertman1
Hey for those of you interested in some Bridgeport Ezpathe Lathe parts I have them for sale. What is included is everything in the control box, all but the relays in the bottom I need those.
Hello Guys,
I purchased a Hardinge chucker lathe and found out it needs the spindle bearings replaced, has anyone ever done this on here how hard is it and what are the part numbers for the...
https://www.ebay.com/usr/almachllc
I have for sale the following items not listed on eBay yet
Hardinge Bar Feeder
12' CNC ENHANCEMENTS BAR FEEDER, Model Hydroturn, S/N 0973
Hardinge threading...
I have a Huanyang 10HP VFD and it keeps kicking the vfd off, I have a rotary phase converter but was told that if I hook it up to the CNC it would blow the computer in it and this VFD keeps kicking...
Thank you for the information, what is a good manufacturer
Hello Guys
I have a Wasino CNC lathe that is rated at 2.2Kva and I only have single phase 220 in my shop. I need to know what size VFD would work with this lathe. Thanks in advance for your input.
hey Victor,
any way you can repost these manuals. Thanks,Bert
my email addy is [email protected]
thank you Steve for your help appreciate it
Let me know how it goes. I welded up a spreader bar for mine so that wouldn't happen, let me know if you need any help with sorting wires. Bert
okay thank you, for the fast response I will go ahead and hook up my new rotary phase converter and branch off the control circuit so I don't fry it. Bert
So Dave, did you hook up a VFD to your Bridgeport Lathe? My lathe is also 220V/460V with the motor running at 460V. I was told that you bring the single phase power into the box and the transformer...
I also have a 7.5 HP 230volt motor sitting here, so I will look at that option also, the inside cabinet on my states 230 volts but outside of the cabinet it has 460 volts, so I will check this out.
thank you for the reply I will check out the motor and see what it states on it. Bert
I just purchased a Bridgeport Romi at a really good price and I live in the sticks with no 3 phase power and was wanting to hook up a VFD to this thing, but I am not sure how to go about it, any help...
did you get your lathe up and running, no luck on my end
it is a 1996, I haven't had a chance to do anything on it yet.
Hey Brian,
Just purchased a used Bridgeport Romi EzPath Lathe 96 model, need some help on the programming and maybe point me in the right direction for a video on programming it? Thanks in advance...
I just picked up one of these lathes dirt cheap, it is 240 3 phase power, I do not have 3 phase power where I live. Can you run this lathe off of a rotary phase converter or should I get a VFD drive,...
Thank you Jim for responding, the motors are servos, 2 axis machine, MDS-A-V2-101 Servo Amplifier, MDS-A-SP-110 Spindle Amplifier, MDS-A-CV-110 Common Converter, Has a hydraulic chuck.
I have a Daewoo Puma 6G with a Mitsubishi controller 520L I believe and want to run Mach 3 on it and get rid of the control, what do I need to purchase to get it up and running. Thanks Guys for your...