I have the same machine that i want to convert into a cnc. It has different motors. I have not done any research on them yet
...
Type: Posts; User: Krlerma
I have the same machine that i want to convert into a cnc. It has different motors. I have not done any research on them yet
...
I will try this. I cant do much for a few days. Im in charge of a photo shoot of our products. Eeew
Still fighting this issue. It seems to be something with the stepper motors and setting my steps per unit and setting up the gantry square. Squarenesshas been quite a bear to do. It seems good...
Its a 3/8 carbide compression bit.
Heya all. Im struggling with this one. Whats going on is i cut two parts that are both 15x20 out of mdf. When i put them to next to each other, they are not the same size. One is wider by .5mm or...
I performed some tests today. The thing that made the biggest diference was the stepover. Thanks to all that helped
Thanks guys. Ill look at doing that. What bit do you guys recommend? The same 2 flute corebox bit or is there something else that might work better?
Thanks
So here is the file. I probably have the numbers wrong. I need to preface that this is my first 3d model that i have tried to cnc. I do cabinet parts with it and thats it. Maybe its my fault for...
Jim,
I'm using a 1/2" ball bit. The feed is 92 in/min. Speed is 1000 ft/min . For the material, I used MDF for my first test and ebony for a second test. I was able to hand scrape the ebony...
I have been lurking for some time and decided to finally post a question. I am making some instrument fingerboards in fusion360. I have all thetoolpaths correct but i am struggling with the final...